Post Blade

[VCM3]

The day after & I have some real nice knives to list up....


First up,Ken Erickson....



Knife maker Ken Erickson,trapper with single spear blade. 3.5" knife ,2-5/8" blade, OAL 6-1/8" open. Pinchable ,smooth 6,6+ action. Spring is a teeny,teeny bit proud of the liners closed & half open position,not open,it is flush. It is such a slight amount that can only be felt with your finger nail & IMO,not enough to bother me & or,to discount this knife. The bone is killer,some of the best I've seen,I know it is hand jigged by Ken. Steel on the blade & spring is un known,my bet ATS-34 ss. Looks to be a nice thin flat grind. Nice swedge,slim,sweet rounded bolsters. Liner,bolster,cap,one piece milled.Satin finish on the bolster,cap,shield & blade. SS shield is pinned & inlaid. Just a fantastic knife here. Condition ,pre owned,looks to be un used & very excellent
Shipping in the States,Paypal fee & storage case included
$475.

>>>>>This knife is Sold pending funds

 

[VCM3]

Knife maker Jerry Halfrich. " Backpocket" 4-5/8" closed. 3-5/8" blade with 3-1/4" of edge. OAL open is 8-1/4"
CPM-154 ss blade & spring. Deep hollow grind,screaming sharp. Hand rubbed finish on blade. Pre owned,un used,excellent condition. 5+ pull,smooth & snappy. Perfect knife here. Stag is amber dyed. Just a killer folder,can't say enough about this one. SS pinched & fluted bolster. SS pinned & inlaid Federal shield,ss lanyard tube.
Shipping in the States,Paypal fee's & storage case included
$850.

 

[VCM3]

Knife maker Enrique Pena,4.25" size ,drop point " Backpocket" . This knife has a CPM-154 blade & spring. Blade thickness is 1/8" Bolster & liner ,one piece milled,ss. Liner is relieved at tang. Smooth 5 pull. Blade measures 3-5/8" with 3-1/4" of edge.OAL open is 8-1/4". Pre owned,un used,excellent condition. Hand jigged & dyed,black bone,by maker. SS pinned & inlaid shield. Fantastic hand rubbed finish on the blade,as well as a very impressive swedge & nail nick. This knife has a teeny ,teeny bit of side to side blade play in the open position & is priced accordingly. It is very,very slight,almost not detectable.
Shipping in the States & Paypal fee's & storage case included
Braided leather lanyard shown,is included
$500.

 

[VCM3]

Knife maker Marcus Lin. N.Y. Special. 7" OAL,3" of blade,2-3/4" of edge. Dagger type double grind & the tip 1.5" of the top grind is sharpened. Please be sure this is legal in your area. Desert ironwood burl. Loveless type fasteners. #710 on tang. SS bolsters. Tapered tang/red liners. Very nice cowhide sheath formed to the knife,great fit.High polish on blade & bolster.Steel is 3/16" stock Sandvik 12C27 ss,a lot of grinding & work on this knife. Condition is pre owned,appears un used,very ,very good to excellent.
Includes shipping in the States & Paypal fee's
$600.

 

[VCM3]

http://www.vcmcustomknives.com/ab-schaller-worker-ii.html

 

[VCM3]

Knife maker Rick Menefee , " Zulu Spear". Condition pre owned,I was told it was "used" but there are no major scratches or marks on it,so I suspect it was very gently carried & used the same,very little. I say very,very good pre owned condition. 3-7/8" closed. Blade is 2-3/4" with 2.5". OAL open is 6.5". Micarta or G-10 scales ,have a "vanilla" color look to them. SS liners are mill relieved. SS inlaid shield. Titanium pivot pin,all other pins ss. Blade & spring are 154 CM ss. Deep hollow ground,satin finish,drawn swedge,crescent nail pull. Smooth,snappy ,"pinchable" 5+ to 6 pull. Blade centers closed,spring is pretty flush in all half stop positions,it is a little low but not bad at all. Very sharp stout,thin light knife. Great one to carry
Shipping in the States & Paypal fee's included,storage case included
$old

 

[VCM3]

Good price on this one....

http://www.vcmcustomknives.com/swedged-hunter.html

 

[VCM3]

Knife maker Stuart Branson. Forged 1095 integral hunter.Visible hamon,tapered tang,1095 steel. Stabilized redwood burl scales.,ss pins. 0AL is 8.25" with 3-3/4" of cutting edge. Gorgeous tooled cowhide sheath by maker,looks like it is deerskin lined. Nice balance,feels great in hand,wicked razor edge. Condition is pre owned,un used very,very good condition.
Price includes shipping in the States & Paypal fee's
$400.

 

[VCM3]

Don't like my prices ?

I am always open to a reasonable offer. That goes for any knife I have FS.
The scenario is,I may , or may not , be able to come to terms with you. No harm,no foul,Thanks All,-Vince

 

[BarFlyB]

Knife maker Rick Menefee , " Zulu Spear". Condition pre owned,I was told it was "used" but there are no major scratches or marks on it,so I suspect it was very gently carried & used the same,very little. I say very,very good pre owned condition. 3-7/8" closed. Blade is 2-3/4" with 2.5". OAL open is 6.5". Micarta or G-10 scales ,have a "vanilla" color look to them. SS liners are mill relieved. SS inlaid shield. Titanium pivot pin,all other pins ss. Blade & spring are 154 CM ss. Deep hollow ground,satin finish,drawn swedge,crescent nail pull. Smooth,snappy ,"pinchable" 5+ to 6 pull. Blade centers closed,spring is pretty flush in all half stop positions,it is a little low but not bad at all. Very sharp stout,thin light knife. Great one to carry
Shipping in the States & Paypal fee's included,storage case included
$350.

I'll take the menefee if it's still available! Thanks.

 

[VCM3]

I'll take the menefee if it's still available! Thanks.

It is Thanks,I sent a PM

 

[VCM3]

Erickson SPF's

Menefee folder sold

BTT