Search results

  1. sharp_edge

    ZT 562 G10

    Sharp dressed knives
  2. sharp_edge

    knife for cutting climbing rope?

    Watch the movie Vertical Limit. I believe it's a crappy Buck or a knockoff. Either way it's good enough to save two kids at the cost of the dad's life
  3. sharp_edge

    Recommendation? Titanium frame Lock, other than CRK

    Best frame lock folder that does not cost you too much money and retains the value well is Hinderer XM-18 3.5" skinny, as of now.
  4. sharp_edge

    Regular production PM2 in cruwear and brown micarta!!

    Mistakes happen and it is OK. But I expect Spyderco comes up with with a CQI version of this Micarta Cruwear PM2.
  5. sharp_edge

    Favorite current-production assisted knives?

    very few people are interested in assisted opening knives because they do not give you control of opening. Seriously, assisted opening is outdated.
  6. sharp_edge

    Doug Ritter Hogue - Is the hype true..?

    Agree. I don't understand why Hogue/Ritter makes the knife thicker behind the edge than Ritter Griptilian. I feel even BM Super Freak is thinner behind the edge than Higue Ritter.
  7. sharp_edge

    Recommendation? Titanium frame Lock, other than CRK

    If you don't care about the country of origin, check out Reate.
  8. sharp_edge

    Regular production PM2 in cruwear and brown micarta!!

    I'm surprised to see the long cutout of the compression lock liner as @CPM-ROCCO showed in the picture. I'm curious to know what it is for. It certainly compromises the sturdiness of the knife as that portion of the scale becomes more flex (though I am not suggesting it will easily break). The...
  9. sharp_edge

    Spyderco 2021 Lists: Delivered & Upcoming

    This is the exact reason that I post that message here rather than via PM. Anyway, this will be my last post in this thread.
  10. sharp_edge

    Spyderco 2021 Lists: Delivered & Upcoming

    @RamZar - could you please lock this thread and open it only when you post information of Delivered and Upcoming (and lock the thread immediately after that)?
  11. sharp_edge

    Hinderer XM-18 3.5” Lock Stick

    Did you check the pivot screw to see if it is loose? Just another thought.
  12. sharp_edge

    Hinderer XM-18 3.5” Lock Stick

    Sharpie or granite will work the magic. You can send to RHK as suggested but if it were me, I'd just work it out myself. Honestly, that still picture looks normal to me. I also don't see anything abnormal in the video.
  13. sharp_edge

    Ugly feedback: myself

    Not much to the topic of the OP but the PayPal f&f part. I didn’t like it, for a long long time until recently seeing and reading the PayPal 1099 thread. I am afraid going forward we’ll see more and more folks ask for it and pay through it (myself included). We just need to be more careful and...
  14. sharp_edge

    Is aftermarket support important to you?

    Agree with this man on ZT 0393. In fact I did not pull the trigger on the knife due to the stock scales until seeing this exact picture. I was about to buy yours as a backup but someone else claimed it before me. For most knives, however, aftermarket parts are not a factor of my purchases.
  15. sharp_edge

    new hinderer in house.

    Depending on what you mean by "awhile." RHK has been making knives all the time even during the COVID-19 pandemic. Batches of RHK knives have been released all the time - just not everyday or every other week.
  16. sharp_edge

    308 or 762 or 470 or other ZT ?

    None of them. I am a bit picky here with them. They are all fine folders though: 0308 - too big, heavy, and tall, though the blade actually cuts well. The pocket clip looks cheap on such an expensive knife. 0762 - I don't like holes on the handles (they are there for no reason to me: do not look...
  17. sharp_edge

    In your opinion, what is the best general-use production folder made in the past 10 years?

    You picked the wrong xm-18. Try a skinny slicer. You will find it slices better than Hogue Ritter and PM2.
  18. sharp_edge

    In your opinion, what is the best general-use production folder made in the past 10 years?

    It's difficult to pick only one. For me ZT 0562, CS Recon 1, Hinderer XM-18 3.5" skinny, and Spyderco Delica 4 are the top 4 candidates.
  19. sharp_edge

    Spyderco 2021 Lists: Delivered & Upcoming

    To me, the Zome handles are ruining the aesthetics of those knives. A solid color (blue or OD green) would be a much better choice to me. I'm surprised that the DLC 20cv Lime green PM2 is still available.
Top