- Joined
- Jan 10, 2015
- Messages
- 1,673
Hi All, this one is finished and available.
52100 at 62 hardness. Thin slight convex grind done on rotary platen. Full distal taper from 3mm down to 1mm.
Choil and spine rounded for comfort. Balance is just behind the choil as shown in the photo below.
Ironwood with silver half dollar spacer, buffed lightly. This ironwood has a glow and grain that is not common. A very beautiful piece to be sure. Not overly gaudy, just elegant lines and grain.
Blade sanded to 1200 and buffed lightly. It's not a mirror finish, but I am liking it. Should take a great patina.
.
Thanks for having a look!
52100 at 62 hardness. Thin slight convex grind done on rotary platen. Full distal taper from 3mm down to 1mm.
Choil and spine rounded for comfort. Balance is just behind the choil as shown in the photo below.
Ironwood with silver half dollar spacer, buffed lightly. This ironwood has a glow and grain that is not common. A very beautiful piece to be sure. Not overly gaudy, just elegant lines and grain.
Blade sanded to 1200 and buffed lightly. It's not a mirror finish, but I am liking it. Should take a great patina.
.
Thanks for having a look!
Last edited:
