Robert Erickson
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 2, 2014
- Messages
- 2,815
Hey guys,
I've got two up for grabs tonight. The first is my Predmore Longhunter in 52100 steel. The handle is brick red canvas micarta and Redwood burl bolsters. The blade is 6" long with an OAL of 11.5". It was heat treated by Peter's to RC61. The liners are black and red.
SPECS:
OAL: 11.5"
BLADE: 6" long, 1.5" wide, Full flat grind with 600 grit cork belt finish and unsharpened swedge. Edge thickness is 0.015" before sharpening.
HANDLE: Brick red canvas micarta with Redwood burl bolsters. Black micarta liner and pins. Red G10 pinstripe and spacer.
STEEL: 0.156" 52100 heat treated by Peter's to RC61
SHEATH: Kydex or basic leather pouch sheath included in price.
$SOLD Shipped CONUS
International buyers welcome, shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM for arrangements.
Comments/questions/critiques welcome
Thanks!
fullsizeoutput_84d by Robert Erickson, on Flickr
fullsizeoutput_84b by Robert Erickson, on Flickr
fullsizeoutput_83e by Robert Erickson, on Flickr
fullsizeoutput_84a by Robert Erickson, on Flickr
fullsizeoutput_850 by Robert Erickson, on Flickr
fullsizeoutput_851 by Robert Erickson, on Flickr
fullsizeoutput_840 by Robert Erickson, on Flickr
fullsizeoutput_852 by Robert Erickson, on Flickr
The second blade is a variation of my Predmore Shorthunter in S35VN with ghost black G10 from AKS. The steel was heat treated by Peter's to RC60.
SPECS:
OAL: 9"
BLADE: 4" long, 1 3/8" wide, full flat grind, 400 grit hand sanded finish. Edge down to 0.09" before sharpening.
HANDLE: Ghost black G10 from AKS and stainless steel pins and lanyard tube.
STEEL: 0.125" S35VN heat treated by Peter's to RC60
SHEATH: Kydex or basic leather pouch sheath included in price.
$*SOLD* Shipped CONUS
International buyers welcome, shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM for arrangements.
Comments/questions/critiques welcome
Thanks!
fullsizeoutput_85d by Robert Erickson, on Flickr
fullsizeoutput_85e by Robert Erickson, on Flickr
fullsizeoutput_86d by Robert Erickson, on Flickr
fullsizeoutput_86c by Robert Erickson, on Flickr
fullsizeoutput_86b by Robert Erickson, on Flickr
fullsizeoutput_86a by Robert Erickson, on Flickr
fullsizeoutput_869 by Robert Erickson, on Flickr
fullsizeoutput_868 by Robert Erickson, on Flickr
fullsizeoutput_867 by Robert Erickson, on Flickr
I've got two up for grabs tonight. The first is my Predmore Longhunter in 52100 steel. The handle is brick red canvas micarta and Redwood burl bolsters. The blade is 6" long with an OAL of 11.5". It was heat treated by Peter's to RC61. The liners are black and red.
SPECS:
OAL: 11.5"
BLADE: 6" long, 1.5" wide, Full flat grind with 600 grit cork belt finish and unsharpened swedge. Edge thickness is 0.015" before sharpening.
HANDLE: Brick red canvas micarta with Redwood burl bolsters. Black micarta liner and pins. Red G10 pinstripe and spacer.
STEEL: 0.156" 52100 heat treated by Peter's to RC61
SHEATH: Kydex or basic leather pouch sheath included in price.
$SOLD Shipped CONUS
International buyers welcome, shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM for arrangements.
Comments/questions/critiques welcome
Thanks!
fullsizeoutput_84d by Robert Erickson, on Flickr
fullsizeoutput_84b by Robert Erickson, on Flickr
fullsizeoutput_83e by Robert Erickson, on Flickr
fullsizeoutput_84a by Robert Erickson, on Flickr
fullsizeoutput_850 by Robert Erickson, on Flickr
fullsizeoutput_851 by Robert Erickson, on Flickr
fullsizeoutput_840 by Robert Erickson, on Flickr
fullsizeoutput_852 by Robert Erickson, on Flickr
The second blade is a variation of my Predmore Shorthunter in S35VN with ghost black G10 from AKS. The steel was heat treated by Peter's to RC60.
SPECS:
OAL: 9"
BLADE: 4" long, 1 3/8" wide, full flat grind, 400 grit hand sanded finish. Edge down to 0.09" before sharpening.
HANDLE: Ghost black G10 from AKS and stainless steel pins and lanyard tube.
STEEL: 0.125" S35VN heat treated by Peter's to RC60
SHEATH: Kydex or basic leather pouch sheath included in price.
$*SOLD* Shipped CONUS
International buyers welcome, shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM for arrangements.
Comments/questions/critiques welcome
Thanks!
fullsizeoutput_85d by Robert Erickson, on Flickr
fullsizeoutput_85e by Robert Erickson, on Flickr
fullsizeoutput_86d by Robert Erickson, on Flickr
fullsizeoutput_86c by Robert Erickson, on Flickr
fullsizeoutput_86b by Robert Erickson, on Flickr
fullsizeoutput_86a by Robert Erickson, on Flickr
fullsizeoutput_869 by Robert Erickson, on Flickr
fullsizeoutput_868 by Robert Erickson, on Flickr
fullsizeoutput_867 by Robert Erickson, on Flickr
Last edited: