- Joined
- Apr 13, 2017
- Messages
- 1,803
Hi Everybody, Here’s a new handy sized hunter up for your consideration.
Steel .195” 440C professional HT 59/60. Hand sanded to 600 grit for a clean satin finish with mill finish flats.
Edge before sharpening was .015” or so and the blade glides through phone book paper, leather, rope etc.
Dimensions: 9 3/8” OAL, Tip to Scales 5 1/8” Width 1 1/2”
Bocote scales with red and black racing stripes, sanded to 1200 grit and affixed with 3 copper pins, finished with Danish oil and carnauba wax.
The W&C two tone sheath is lined with a fine felt like material and has a small cam in the welt for retention, it's quite a snug fit.
Asking only $135 via paypal, check or MO to your door and of course your satisfaction is my only priority.
Steel .195” 440C professional HT 59/60. Hand sanded to 600 grit for a clean satin finish with mill finish flats.
Edge before sharpening was .015” or so and the blade glides through phone book paper, leather, rope etc.
Dimensions: 9 3/8” OAL, Tip to Scales 5 1/8” Width 1 1/2”
Bocote scales with red and black racing stripes, sanded to 1200 grit and affixed with 3 copper pins, finished with Danish oil and carnauba wax.
The W&C two tone sheath is lined with a fine felt like material and has a small cam in the welt for retention, it's quite a snug fit.
Asking only $135 via paypal, check or MO to your door and of course your satisfaction is my only priority.
Last edited:
