- Joined
- Mar 26, 2018
- Messages
- 5,357
Hello BladeForums,
I hope you are all having a really great day!
Today I have SEVEN excellent knives for you! I've been going down the custom rabbit hole, so these have gotta go! All of these have been at least carried around the house to get a feel for them, if not used. I would not call any of these knives new, although the may look like it. They are all in SPECTACULAR condition, but I will do my best to note any flaws, if any!
I accept most forms of payment and ship everything either USPS First Class or Priority (depending on speed differences) with tracking. I apologize, but U.S. buyers only at this time.
First up is an Albers Cutlery fixed blade in CPM-154 and desert ironwood. This is an absolutely BEAUTIFUL knife, and is actually the knife that was used to advertise the fixed blades when they were first released. The desert ironwood is gorgeous, with a lot of figure and chatoyance. Like all of Eric's products, fit and finish is stupendous on this knife. It also comes with a very high quality, hand-crafted leather sheath. The knife is honestly just a little too pretty for me, and I've had trouble bring myself to use it... And if it doesn't get used, off it goes. My loss is your gain!
Comes with the knife and sheath.
I am asking $180 Shipped for the Alber's Cutlery fixed blade in CPM-154 and desert ironwood.
Next up is a Bradford Guardian 3 in stonwashed AEB-L with false edge, and 3D black canvas Micarta. This knife features a VERY sharp, 3.5" blade with a 3" cutting edge and finger choil. Fit and finish is excellent on this knife. The contoured, canvas Micarta scales are very comfortable in the hand. AEB-L is a very tough, very corrosion resistant steel that is known for taking a very fine edge. This knife not only comes with the stock Bradford leather sheath, but also comes with a black Kydex taco sheath from Bradford, AND a Spyderco G-Clip!
Comes with the knife, leather sheath, kydex sheath, and G-Clip.
I am asking $125 Shipped for the Bradford Guardian 3 in AEB-L with 3D black canvas Micarta scales, leather sheath, Kydex sheath, and Spyderco G-Clip.
Next is a Landi Cutlery MPS in 1095 steel and curly koa. This full-tang knife features 3.75" cutting edge made from 1/8" thick 1095 steel, heat treated to 59-60rc by Peter's Heat Treat. The tang was tapered when the gorgeous curly koa handle was mounted. Brass mosaic pins. Convex cutting edge. This knife is sharp!
Comes with just the knife (I can throw in a universal leather sheath if you would like though).
I am asking$55 Shipped SOLD! for the Landi MPS in 1095 and curly koa wood.
Next we have an upgraded April 2021 Buck of the Month 104 Compadre in 3V steel! This might be the ULTIMATE Buck 104 (and the ultimate bugout knife for that matter)! On top of the ridiculously tough 3V steel with the BOS heat treat, this knife has been upgraded with the brown burlap Micarta scales from the SKBlades exclusive Buck 104 Compadre (instead of the ugly red burlap), and also comes with the custom leather sheath (handcrafted in Idaho) from the SKBlades exclusive 104 Compadre! Only 500 produced.
Comes with the knife, paperwork, and sheath.
I am asking$175 Shipped SOLD! for the Buck 104 Compadre in 3V with upgraded scales and sheath.
Next we have a Spyderco Mule Team in Z-Max PM steel (the same as REX 86, and similar to Maxamet) with a set of Halpern Titanium Rosewood Tek-wood 3D scales installed. Z-Max is an extremely hard, powdered metallurgy steel with absolutely obscene edge retention (even better than 15V!). This is a very sought after Mule Team model. Fit and finish on this knife is excellent! The fit and finish on the gorgeous set of Halpern Titanium (Three Rivers Manufacturing) scales is also excellent. These scales have a very beautiful, warm look to them. Super comfortable in the hand! This knife is unused, but has sat on a shelf since it's purchase.
Comes with the knife and scales.
I am asking$150 Shipped SOLD! for the Spyderco Mule Team in Z-Max PM steel and Halpern Titanium Rosewood 3D scales.
Next we have a Spyderco Mule Team in Micro-Melt PD#1 steel (CPM-Cru-Wear analog) and custom, black canvas Micarta scales, with nickel-silver pins/lanyard tube. This knife features one of the very best tool steels available! Great edge retention, great toughness, good sharpening behavior, and decent corrosion resistance. The scales have been installed very well, with zero gaps. Pins are very well ground (if I do say so myself). This would make one heck of an outdoors knife!
Comes with just the knife.
I am asking $125 Shipped for the Spyderco Mule Team in Micro-Melt PD#1 steel and black canvas Micarta scales.
And last, we have a Spyderco Mule Team in Bohler K390 steel, and a white bone handle. K390 is an excellent tool steel with very high edge retention. Super great stuff. The white bone handle has zero gaps around the blade (although you can see the glue seams around the pins). Fit and finish on the blade is excellent. This knife would be an absolute knock out is someone took the time to polish the bone handle (which was my plan)... I just don't have the time!
Comes with just the knife.
I am asking $110 Shipped for the Spyderco Mule Team in K390 steel and white bone handle.
Thanks for looking and have a great day!
I hope you are all having a really great day!
Today I have SEVEN excellent knives for you! I've been going down the custom rabbit hole, so these have gotta go! All of these have been at least carried around the house to get a feel for them, if not used. I would not call any of these knives new, although the may look like it. They are all in SPECTACULAR condition, but I will do my best to note any flaws, if any!
I accept most forms of payment and ship everything either USPS First Class or Priority (depending on speed differences) with tracking. I apologize, but U.S. buyers only at this time.
First up is an Albers Cutlery fixed blade in CPM-154 and desert ironwood. This is an absolutely BEAUTIFUL knife, and is actually the knife that was used to advertise the fixed blades when they were first released. The desert ironwood is gorgeous, with a lot of figure and chatoyance. Like all of Eric's products, fit and finish is stupendous on this knife. It also comes with a very high quality, hand-crafted leather sheath. The knife is honestly just a little too pretty for me, and I've had trouble bring myself to use it... And if it doesn't get used, off it goes. My loss is your gain!
Comes with the knife and sheath.
I am asking $180 Shipped for the Alber's Cutlery fixed blade in CPM-154 and desert ironwood.
Next up is a Bradford Guardian 3 in stonwashed AEB-L with false edge, and 3D black canvas Micarta. This knife features a VERY sharp, 3.5" blade with a 3" cutting edge and finger choil. Fit and finish is excellent on this knife. The contoured, canvas Micarta scales are very comfortable in the hand. AEB-L is a very tough, very corrosion resistant steel that is known for taking a very fine edge. This knife not only comes with the stock Bradford leather sheath, but also comes with a black Kydex taco sheath from Bradford, AND a Spyderco G-Clip!
Comes with the knife, leather sheath, kydex sheath, and G-Clip.
I am asking $125 Shipped for the Bradford Guardian 3 in AEB-L with 3D black canvas Micarta scales, leather sheath, Kydex sheath, and Spyderco G-Clip.
Next is a Landi Cutlery MPS in 1095 steel and curly koa. This full-tang knife features 3.75" cutting edge made from 1/8" thick 1095 steel, heat treated to 59-60rc by Peter's Heat Treat. The tang was tapered when the gorgeous curly koa handle was mounted. Brass mosaic pins. Convex cutting edge. This knife is sharp!
Comes with just the knife (I can throw in a universal leather sheath if you would like though).
I am asking
Next we have an upgraded April 2021 Buck of the Month 104 Compadre in 3V steel! This might be the ULTIMATE Buck 104 (and the ultimate bugout knife for that matter)! On top of the ridiculously tough 3V steel with the BOS heat treat, this knife has been upgraded with the brown burlap Micarta scales from the SKBlades exclusive Buck 104 Compadre (instead of the ugly red burlap), and also comes with the custom leather sheath (handcrafted in Idaho) from the SKBlades exclusive 104 Compadre! Only 500 produced.
Comes with the knife, paperwork, and sheath.
I am asking
Next we have a Spyderco Mule Team in Z-Max PM steel (the same as REX 86, and similar to Maxamet) with a set of Halpern Titanium Rosewood Tek-wood 3D scales installed. Z-Max is an extremely hard, powdered metallurgy steel with absolutely obscene edge retention (even better than 15V!). This is a very sought after Mule Team model. Fit and finish on this knife is excellent! The fit and finish on the gorgeous set of Halpern Titanium (Three Rivers Manufacturing) scales is also excellent. These scales have a very beautiful, warm look to them. Super comfortable in the hand! This knife is unused, but has sat on a shelf since it's purchase.
Comes with the knife and scales.
I am asking
Next we have a Spyderco Mule Team in Micro-Melt PD#1 steel (CPM-Cru-Wear analog) and custom, black canvas Micarta scales, with nickel-silver pins/lanyard tube. This knife features one of the very best tool steels available! Great edge retention, great toughness, good sharpening behavior, and decent corrosion resistance. The scales have been installed very well, with zero gaps. Pins are very well ground (if I do say so myself). This would make one heck of an outdoors knife!
Comes with just the knife.
I am asking $125 Shipped for the Spyderco Mule Team in Micro-Melt PD#1 steel and black canvas Micarta scales.
And last, we have a Spyderco Mule Team in Bohler K390 steel, and a white bone handle. K390 is an excellent tool steel with very high edge retention. Super great stuff. The white bone handle has zero gaps around the blade (although you can see the glue seams around the pins). Fit and finish on the blade is excellent. This knife would be an absolute knock out is someone took the time to polish the bone handle (which was my plan)... I just don't have the time!
Comes with just the knife.
I am asking $110 Shipped for the Spyderco Mule Team in K390 steel and white bone handle.
Thanks for looking and have a great day!
Last edited:
