chiral.grolim
Universal Kydex Sheath Extension
- Joined
- Dec 2, 2008
- Messages
- 6,422
Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.
Syderco Calypso III is already gone, sorry, just re-using the group pic.
I do also have a SOLD, barely used (by previous owner here on BF) and excellent condition, I have serviced and lubed it to beautiful drop-shut closure, i just prefer the axis-lock to the ant-lock, no box SOLD, email for pics, I will add them when I get a chance.
Post "I'll take the ***** " indicating which knife and send me a PM or e-mail to follow up for payment information. Thanks for looking!
Buck Vantage Avid 13C26 steel with Diamondwood Scales - barely used, razor sharp, flips perfectly, excellent lock-up (I can make a quick video if desired), perfect centering, includes original box, hard to find disco'd model. Has some wear on the scale-finish, but otherwise is perhaps the best example of a Vantage you could come across, I prefer it to the S30V. $60 to your door.
Buck Vantage Force Select but I have swapped the regular scales for a set of G10 scales from a Vantage Pro. The knife is otherwise brand new, never carried or used, includes box. It flips OK (not as well as the Avid above) and has a strong/stiff liner. $47.
Benchmade Bone Collector 15030-1
D2 steel, G10 handle, disco'd knife, used/sharpened but excellent condition, perfect centering, drop-shut closure, includes box/stuff, email for more pics, asking $85
Kershaw EnerG 1740 - another disco'd knife, 14C28n steel, never used/carried although I did modify the pocket-clip slightly, rounding the tip to improve comfort and use with the pocket - it's less pointy now, you'd never have know it was modded if I hadn't told you
The knife is perfectly centered, flips beautifully - this is a manual flipper, no A/O spring, but the flipper is an 'actuator' separate from the tang of the blade. Knife has solid lock-up, it's just a bit too small for me. Other than the clip-fix, it is new-in-box (although the box says its 1740BLK which it isn't, this is the gray model with trak-tek insert) $57
Gerber Center Drive Black, #30-001427
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-To...t-Set-Black-Berry-Compliant-Sheath-_30-001427
New-without-box but includes paperwork and M4/M16 bit set as seen in the Gerber link (forgot to snap a photo). I don't have the Gerber-brand sheath but am including a Condor MA32 Single Pistol Magazine Utility Pouch as seen in the photos. The bit-set doesn't fit well in the sheath along with the tool but does make for slightly slimmer carry. The sheath is adjustable, includes detachable belt/gear-loop, and it fits the tool very well. $60
Gerber MP600 Pro Scout # 47563
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-Tools/One-Hand-Opening/MP600_47563
The multitool is new-without-box but includes paperwork and sheath. This version has integral wire cutters (actually stronger than the replaceable ones), scissors, and the replaceable saw-blade (you can blades for cutting wood and metal from your local hardware store that fit the adapter). $40
I can offer a MOD on this tool (for a little more $$), re-arranging the tools and modifying the handles to allow the needle-nose to retract further in and lock in place if desired. I can also modify the tiny flat-head into an awl if desired. Let me know if you want pics of examples.
This is a great, sturdy pliers-based multitool at low cost, made in USA.
These are production Victorinox SAKs, all purchased new-in-box, then modified by addition of a pocket-clip directly to the non-presentation alox scale (orients the knife for right-front-pocket tip-up carry of main blade).
These make great gifts and are very office-friendly. Adding the pocket-clip increases the likelihood that the owner will carry and thereafter enjoy using the knife. Don't miss out!
Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.
Limited Edition 2018 Berry-red Pioneer ($58)
Green Pioneer $OLD
Silver Pioneer X ($58)
Red Pioneer X ($60) - 'knifecenter' on plate
Electrician ($old)
Rancher ($55)
If you don't see a model you'd like clipped, just let me know and I can order and clip one for you. I do have a Black Farmer and another black Pioneer waiting for a clip, will list those in the future but you are welcome to claim one now.
Here is a link to more photos: https://imgur.com/a/gzGsrYt
The gray clips are a bit darker than the silver scales (I can polish them further), the black clip looks really good on the dark-gray and the black scaled Pioneers. The clips are stainless steel, the screws are tapped directly into the aluminum. Other than the addition of the clip, each knife is brand-new-in-box.
Syderco Calypso III is already gone, sorry, just re-using the group pic.
I do also have a SOLD, barely used (by previous owner here on BF) and excellent condition, I have serviced and lubed it to beautiful drop-shut closure, i just prefer the axis-lock to the ant-lock, no box SOLD, email for pics, I will add them when I get a chance.
Post "I'll take the ***** " indicating which knife and send me a PM or e-mail to follow up for payment information. Thanks for looking!
Buck Vantage Avid 13C26 steel with Diamondwood Scales - barely used, razor sharp, flips perfectly, excellent lock-up (I can make a quick video if desired), perfect centering, includes original box, hard to find disco'd model. Has some wear on the scale-finish, but otherwise is perhaps the best example of a Vantage you could come across, I prefer it to the S30V. $60 to your door.
Buck Vantage Force Select but I have swapped the regular scales for a set of G10 scales from a Vantage Pro. The knife is otherwise brand new, never carried or used, includes box. It flips OK (not as well as the Avid above) and has a strong/stiff liner. $47.
Benchmade Bone Collector 15030-1
D2 steel, G10 handle, disco'd knife, used/sharpened but excellent condition, perfect centering, drop-shut closure, includes box/stuff, email for more pics, asking $85
Kershaw EnerG 1740 - another disco'd knife, 14C28n steel, never used/carried although I did modify the pocket-clip slightly, rounding the tip to improve comfort and use with the pocket - it's less pointy now, you'd never have know it was modded if I hadn't told you
The knife is perfectly centered, flips beautifully - this is a manual flipper, no A/O spring, but the flipper is an 'actuator' separate from the tang of the blade. Knife has solid lock-up, it's just a bit too small for me. Other than the clip-fix, it is new-in-box (although the box says its 1740BLK which it isn't, this is the gray model with trak-tek insert) $57
Gerber Center Drive Black, #30-001427
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-To...t-Set-Black-Berry-Compliant-Sheath-_30-001427
New-without-box but includes paperwork and M4/M16 bit set as seen in the Gerber link (forgot to snap a photo). I don't have the Gerber-brand sheath but am including a Condor MA32 Single Pistol Magazine Utility Pouch as seen in the photos. The bit-set doesn't fit well in the sheath along with the tool but does make for slightly slimmer carry. The sheath is adjustable, includes detachable belt/gear-loop, and it fits the tool very well. $60
Gerber MP600 Pro Scout # 47563
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-Tools/One-Hand-Opening/MP600_47563
The multitool is new-without-box but includes paperwork and sheath. This version has integral wire cutters (actually stronger than the replaceable ones), scissors, and the replaceable saw-blade (you can blades for cutting wood and metal from your local hardware store that fit the adapter). $40
I can offer a MOD on this tool (for a little more $$), re-arranging the tools and modifying the handles to allow the needle-nose to retract further in and lock in place if desired. I can also modify the tiny flat-head into an awl if desired. Let me know if you want pics of examples.
This is a great, sturdy pliers-based multitool at low cost, made in USA.
These are production Victorinox SAKs, all purchased new-in-box, then modified by addition of a pocket-clip directly to the non-presentation alox scale (orients the knife for right-front-pocket tip-up carry of main blade).
These make great gifts and are very office-friendly. Adding the pocket-clip increases the likelihood that the owner will carry and thereafter enjoy using the knife. Don't miss out!
Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.
Limited Edition 2018 Berry-red Pioneer ($58)
Green Pioneer $OLD
Silver Pioneer X ($58)
Red Pioneer X ($60) - 'knifecenter' on plate
Electrician ($old)
Rancher ($55)
If you don't see a model you'd like clipped, just let me know and I can order and clip one for you. I do have a Black Farmer and another black Pioneer waiting for a clip, will list those in the future but you are welcome to claim one now.
Here is a link to more photos: https://imgur.com/a/gzGsrYt
The gray clips are a bit darker than the silver scales (I can polish them further), the black clip looks really good on the dark-gray and the black scaled Pioneers. The clips are stainless steel, the screws are tapped directly into the aluminum. Other than the addition of the clip, each knife is brand-new-in-box.
Last edited:
