Buck Haxby 259

Joined
Oct 6, 2021
Messages
31
I'm a new member, and I apologise in advance if I'm posting this in the wrong section...πŸ€·β€β™‚οΈ??

Today I ordered myself the Buck Haxby 259. I've bought it based mostly on its looks. I tried to find some reviews on this knife, and I also searched for some videos etc. But apart from all the sellers descriptions, I.have found very little other info on this knife..?

It's too late to go back cos I've already ordered it, and it will be in the post to me tomorrow morning.

I'm a little apprehensive to be honest. I don't regret ordering it yet, but at the same time I'm wondering if I might have rushed into my decision without trying to do a bit more in depth research.

Has anyone got the Haxby 259 themselves, or do you know of anyone who has..?

I'd really appreciate any honest opinions or reviews if anyone can help me please.

Thankyou.

Stay safe and be lucky. πŸ€πŸ‘
 
Tyson, welcome to the Buck forum. This would be the right place but the 259 has not really been out that long. I have not seen any reviews here yet except speculative discussion about the new models. I just checked and you can find a few reviews on YouTube, you might check them out. Please take this in all friendliness but life is too short to have what I perceive as second guessing a $35 purchase. You've already ordered it, I challange you to come back here after you've played with it for awhile and give us your own review. We would love to have it posted here. /Roger
(p.s. we like pictures... ;o)
 
Last edited:
a fella at work bought all the new Buck Chinese made models. so I've got to see them and play with them including this one. its not bad for what it is. fit and finish was decent and had sharp edge and decent bevels. no blade play in any direction on his. I dont remember much else, but I do remember it was not bad for the low cost. hope that helps.
 
Tyson, welcome to the Buck forum. The 259 has not really been out that long. I have not seen any reviews here yet except speculative discussion aout the new models. I just checked and you can find a few reviews on YouTube, you might check them out. Please take this in all friendliness but life is too short to have what I perceive as anguish over a $35 purchase. You've already ordered it, I challange you to come back here after you've played with it for awhile and give us your own review. /Roger
Cheers Roger. Thanks for your time to reply to me.

I know what you mean mate. It's only a cheap knife. I'm still learning about the different steels, and I was already aware before I ordered it that the 7Cr on this new Buck is not regarded as being the greatest material out there. But that wasn't important to me because it will be a knife that sits on my table at home and be in arms reach when I need to open a package, sharpen a pencil, cut a bit of tape,...or paracord etc. I understand that this Buck runs on ball bearings instead of washers...? I've never had a knife that runs on ball bearings before..? The blade steel is not a problem whatsoever, and I certainly like the look of it. It's the smoothness of the action, or the possible lack of it that is on my mind.

But no matter what I think of my new Buck when it arrives, I'll definitely be keeping it.

And yes Roger,....great idea mate, i didn't think of that.? When it arrives I'll take a few photos, and a video of it as I flip it open, and ill post it all up on this thread with a very honest and straight talking opinion/review of what I personally think of it. That way, if there is anyone else like me who is struggling to find a decent in depth review of the Buck Haxby 259, they'll find all they need to know about it on this forum.

Cheers Roger. Respect πŸ‘

Watch this space....πŸ€πŸ‘πŸ˜Š
 
a fella at work bought all the new Buck Chinese made models. so I've got to see them and play with them including this one. its not bad for what it is. fit and finish was decent and had sharp edge and decent bevels. no blade play in any direction on his. I dont remember much else, but I do remember it was not bad for the low cost. hope that helps.
Cheers JB ....things are starting to sound promising already. I'll post up my thoughts when it arrives. Fingers crossed, I should get it by Friday/Saturday latest. πŸ‘
 
The Haxby is a fairly large knife. It has great detent and flipping action on ball bearings. The pocket clip works well and it's light weight (4.5 oz) when compared to the brass 110 (7.2 oz). Aside from being larger, and liner lock vs frame lock, it has a similar look to the new 040 Onset. I'm sure if it was made in the US, many more here would own one.

 
The Haxby is a fairly large knife. It has great detent and flipping action on ball bearings. The pocket clip works well and it's light weight (4.5 oz) when compared to the brass 110 (7.2 oz). Aside from being larger, and liner lock vs frame lock, it has a similar look to the new 040 Onset. I'm sure if it was made in the US, many more here would own one.

Cheers mate. I'm just watching a video on the difference between all the different types of knife bearings. Different material washers and ceramic v steel bearings etc. Its all a bit confusing at the moment to be honest..!

That's a lovely photo of the two Bucks together. I'm now growing more confident that I won't be disappointed with the Huxby when it arrives by the end of the week. If for some reason I don't like the mechanical workings of it, all is not lost cos I think it's a beautiful looking bit of kit, and I can just stare at instead. πŸ˜ŠπŸ‘
 
Cheers mate. I'm just watching a video on the difference between all the different types of knife bearings. Different material washers and ceramic v steel bearings etc. Its all a bit confusing at the moment to be honest..!

That's a lovely photo of the two Bucks together. I'm now growing more confident that I won't be disappointed with the Huxby when it arrives by the end of the week. If for some reason I don't like the mechanical workings of it, all is not lost cos I think it's a beautiful looking bit of kit, and I can just stare at instead. πŸ˜ŠπŸ‘
I own knives made all over rather world from very low end to maybe mid level and im calling that Chris reeves..all relative and debatable of course. high end I can't afford to play in.

anyways all kinds of washers and materials. dont get overwhelmed.....I have run into a rare few duds. it happens but isnt common. most quality makers won't slap their name on a very bad product.

plb nailed it here. if this 259 was made in the states and at a lower price point with the best warranty in the business......most of us would be all over it. I dont think you'll find it to be a bad product. I didnt find it bad at all for the price point.

you an Aussie or British? guess other former British Colonies might use that saying too...not so much here in the deep south where I am though except for the expats.
 
I’ve looked at the Haxby and I like the looks and size. I agree with jb and plb, if it were made here in us even if it was 420hc I’d be all over it and probably 2 or 3. Of them. Thanks for the comparison photo plb !
 
I own knives made all over rather world from very low end to maybe mid level and im calling that Chris reeves..all relative and debatable of course. high end I can't afford to play in.

anyways all kinds of washers and materials. dont get overwhelmed.....I have run into a rare few duds. it happens but isnt common. most quality makers won't slap their name on a very bad product.

plb nailed it here. if this 259 was made in the states and at a lower price point with the best warranty in the business......most of us would be all over it. I dont think you'll find it to be a bad product. I didnt find it bad at all for the price point.

you an Aussie or British? guess other former British Colonies might use that saying too...not so much here in the deep south where I am though except for the expats.
I'm British mate. I'm from the Southern England. The Buck that I've ordered is definitely Chinese. I was aware of this before I ordered cos I know that Buck is a highly regarded American knife company. I thought it was a bit odd at first, so I did some research..? And I found that its basically the same story as with my fantastic Ontario RAT 1 aus 8. Another respected knife maker from the USA, but they have some of there products manufactured by the chinese. If the Buck Haxby I've got coming is anything like my "Taiwan" Ontario RAT 1,....I'll be over the moon with it for sure. πŸ‘
 
I'm British mate. I'm from the Southern England. The Buck that I've ordered is definitely Chinese. I was aware of this before I ordered cos I know that Buck is a highly regarded American knife company. I thought it was a bit odd at first, so I did some research..? And I found that its basically the same story as with my fantastic Ontario RAT 1 aus 8. Another respected knife maker from the USA, but they have some of there products manufactured by the chinese. If the Buck Haxby I've got coming is anything like my "Taiwan" Ontario RAT 1,....I'll be over the moon with it for sure. πŸ‘
gotcha. I got a good friend who's in the midlands. we've been friends for over 20 years......hes always reminding me how great England is and how bad we are state side.πŸ˜‰

yeah I know the rat 1, from Taiwan. think you'll like this Buck, but its from China mainland I believe. Buck checks on its suppliers there so they don't really let junk float through. Taiwan makes high quality stuff in general....but this Buck isn't bad for the price point here. over there y'all pay more....so different game.
 
Well since your British, have you seen or checked out the Buck 317 Ridgeway? It's not a current model, probably from about 2017/2018. A UK and possibly EU exclusive, was not released in the USA but leftover stock was released on the Buck website awhile back.

Gaining its name from the historic Ridgeway National Trail, the folding knife features a reliable slipjoint action and sleek design. The smooth Burlwood handle adds to the knifes elegant and modern style. Its absence of a lock mechanism makes the 317 Ridgeway accessible to customers in the UK as well as other international markets with EDC regulations.

This brings up the question, are locking blades permitted? The Haxby has a locking blade but the above description implies they are not. Perhaps that rule got thrown out with the EU... :)

Some pictures here... https://bladeforums.com/threads/buck-317-ridgeway.1618378/#post-18486883
 
Last edited:
gotcha. I got a good friend who's in the midlands. we've been friends for over 20 years......hes always reminding me how great England is and how bad we are state side.πŸ˜‰

yeah I know the rat 1, from Taiwan. think you'll like this Buck, but its from China mainland I believe. Buck checks on its suppliers there so they don't really let junk float through. Taiwan makes high quality stuff in general....but this Buck isn't bad for the price point here. over there y'all pay more....so different game.
It's a small world JB. The Midlands is approx 2.5hr drive from me if the traffic isn't too heavy. And to be honest JB, there is a lot of unrest and upset over here at the moment. The price of absolutely everything from a loaf of bread, to household bills, to petrol and diesel has rocketed through the roof. I'm afraid to say that your mate in the Midlands who keeps telling you how great it is over here, has got it wrong. Atleast for the time being anyway. A lot of Brits would agree with me when I say that it's like we are living in a foreign country nowadays. The English language is getting run out of town and taken over by various and numerous other foreign languages. This is not the place for me to go into any more detail, and I respect that. But I'm sure you've got a good idea of what I'm going in about.

I've just found some more reviews on the Huxby that I hadn't seen before...πŸ˜€!

On Amazon. And they're all good mate.πŸ‘πŸ˜Š
 
It's a small world JB. The Midlands is approx 2.5hr drive from me if the traffic isn't too heavy. And to be honest JB, there is a lot of unrest and upset over here at the moment. The price of absolutely everything from a loaf of bread, to household bills, to petrol and diesel has rocketed through the roof. I'm afraid to say that your mate in the Midlands who keeps telling you how great it is over here, has got it wrong. Atleast for the time being anyway. A lot of Brits would agree with me when I say that it's like we are living in a foreign country nowadays. The English language is getting run out of town and taken over by various and numerous other foreign languages. This is not the place for me to go into any more detail, and I respect that. But I'm sure you've got a good idea of what I'm going in about.

I've just found some more reviews on the Huxby that I hadn't seen before...πŸ˜€!

On Amazon. And they're all good mate.πŸ‘πŸ˜Š
he just heckles me. dont know he believes it...its more nationalism or football Euro or American style team type trash talking.
 
Well since your British, have you seen or checked out the Buck 317 Ridgeway? It's not a current model, probably from about 2017/2018. A UK and possibly EU exclusive, was not released in the USA but leftover stock was released on the Buck website awhile back.

Gaining its name from the historic Ridgeway National Trail, the folding knife features a reliable slipjoint action and sleek design. The smooth Burlwood handle adds to the knifes elegant and modern style. Its absence of a lock mechanism makes the 317 Ridgeway accessible to customers in the UK as well as other international markets with EDC regulations.

This brings up the question, are locking blades permitted? The Haxby has a locking blade but the above description implies they are not. Perhaps that rule got thrown out with the EU... :)

Some pictures here... https://bladeforums.com/threads/buck-317-ridgeway.1618378/#post-18486883
Hi mate. Sorry,...I missed your reply until just now.

Yes,....in the UK, absolutely all lock knives are illegal to carry "WITHOUT GOOD REASON"...and that's regardless of how long the blade is.


The first 3 paragraphs in the link will tell you all about our UK. "do's and don'ts" when it comes to buying, owning, and carrying all the different types of blades.

But it's not literally as strict as it appears mate...?

For instance, one of my all time favourite EDC is my rusty old Carbone Opinel no8. It's got the typical ugly and dirty blade that you'd expect with carbon. But it's a working knife. Its very scruffy, but it's in perfect working order, and the only thing that's important to me is maintaining regularly so that it's always got a scary shape razors edge. In line with our UK law, my trusty old Opinel no8 couldn't be any more illegal to carry if I tried.

1: The blade is 3.28 inches long. (The uk legal carry limit in public is a Max of 3 inches)

2: The blade is a locker

But thankfully, the police over here seem to use discretion and common sense when it comes to a little "illegal knife" like my no8...?

I've never been stopped and searched whilst on foot amongst the public, but I've been pulled over quite a few times in my van and my lorry for routine checks during my working day.

Nearly every time the police have pulled me over in my van or my lorry, the no8 has been either sitting on the dashboard, or on the seat next to me. While one copper has a sniff around the outside of my vehicles, his/her partner strikes up a conversation with me, and at the same time, he/she will be multi tasking by asking me polite questions and snooping about seeing what I've got laying around in the cab. The first thing that leaps out at them is my Opinel lock knife with a razor sharp blade that is just over quarter of an inch too long. But not once have I had any trouble because of it. They'll pick it up and open it,...then they'll twist the collar to lock the blade. They don't need a ruler to measure the blade, cos they know what they're holding. More often than not, they've not even asked me anything about it...? They'll just pick it up, have a play with it and carry on chatting, before folding it up again, and putting it back where they found it. The reason being is that I'm a middle aged man who is at work. I've even had my big Boker fixed blade sitting on the dashboard before. Same thing,....a quick play about with it, and put it down again. Same thing with other lock knives that are twice the size of my no8. Nothing. They haven't even mentioned it.

I hope you get the idea of how it appears to work over here...?

I've got a fully automatic switchblade in my collection. It's only a cheap and cheerful ganzo and I love it. But I would never be foolish enough to let it leave my house under no circumstances whatsoever. It's just not worth the risk. So it lives on my workbench at home with my other lockers etc that are handy for opening packages, and cutting string etc.

But without doubt it would be a different story if I got dressed up and headed into town with the boys for a few beers one evening and packed the no8 in a pocket.

They certainly wouldn't be as lenient then. And I wouldn't blame them either. Why would someone pack a knife when they're going out for a few beers with the fellas in a town centre that is heaving with nightlife...πŸ€·β€β™‚οΈ? I can't think of one reason why me or anyone would carry a knife into town at night on a social gathering..πŸ€·β€β™‚οΈ?

I do a lot of shooting as well. Not powder rifles though. I've got a nice collection of spring powered air rifles. My top air rifle is a Weihrauch HW97K and its been highly tuned for me by a professional tuner. Major modifications to the internals. There isn't another one like it. Its unique. I use it for hunting if me or the family fancy something different for the table, but it's mainly used to dispatch vermin (pest control) . People in the UK are very nosey. You honestly can't trust anyone when your out during the day or night with a rifle slung over your shoulder. You can spot them a mile off. They're always dog walkers. They'll see me with my rifle and approach me. Then they'll feign interest in my rifle and also spot one of my big fixed blades attached to my belt. Then after a seemingly friendly chat they'll bid me fare well,...wish me luck,...and move on again. But as sure as I'm sitting here typing this to you right now, I guarantee you that a patrol car will turn up within 30 mins at the very latest. But I'm not a silly man, and I'm always one step ahead of the game...? I only shoot and carry big fixed blades and folders on land and property that I have full permission from the owner to be on. It's not me that is doing anything wrong. It's the "lovely and friendly "dog walkers that were breaking the law because they were the ones trespassing on private land or woodland. I always carry my official written shooting permission in an email that I keep in a file. I actually feel for our police sometimes cos they look a bit embarrassed when they realise that the "suspicious and dangerous "looking man reported by the dog walkers, who is armed with a rifle and a huge fixed blade knife that Rambo would be in awe of, is in actual fact a nice and normal fella who is just going about his business with permission from the landowner. I've even been walking home before on public footpaths when the police have turned up. By now, my rifle is legal to carry in public cos I've got it slung over my shoulder in a gun bag. But the huge Boker fixed blade hanging from my waist is technically illegal to carry cos I'm on a public right of way..? Fortunately for me, they always see it for what it is..?

Sorry for this biblical length message to you all. But i wanted to tell my new found American friends on this forum a bit more about our UK knife laws, and how they are policed.

So if you ever visit England and buy a big knife while you're here, use your common sense and don't draw attention to yourself. If you go for a stroll through some ancient English woodland etc, pack your knew knife and enjoy the fresh air. But if you decide to wander into town for a few beers and a bite to eat, leave the knife at home.

It's as simple as that. I hope you fellas might find my post interesting. It's always good to share knowledge.

Thankyou for giving me such a warm welcome to this fantastic and friendly forum. All the very best to everyone.

Respect

God bless,...and be lucky..πŸ™πŸ€πŸ‘πŸ˜Š
 
Well since your British, have you seen or checked out the Buck 317 Ridgeway? It's not a current model, probably from about 2017/2018. A UK and possibly EU exclusive, was not released in the USA but leftover stock was released on the Buck website awhile back.
.hi ya DeSotoSky. Is this the one you mean mate...? I googled "BUCK 317 RIDGEWAY" and a shop in Plymouth is selling them..? Plymouth is a city in the county of Devon. Devon is on the south west coast of England. I've got family in what we call "the west country" and Plymouth is approx a 5 hr drive from my place in Kent (S E England). I hope this link works mate. I'm not very tech minded ..πŸ™„πŸ˜„!


Gaining its name from the historic Ridgeway National Trail, the folding knife features a reliable slipjoint action and sleek design. The smooth Burlwood handle adds to the knifes elegant and modern style. Its absence of a lock mechanism makes the 317 Ridgeway accessible to customers in the UK as well as other international markets with EDC regulations.

This brings up the question, are locking blades permitted? The Haxby has a locking blade but the above description implies they are not. Perhaps that rule got thrown out with the EU... :)

Some pictures here... https://bladeforums.com/threads/buck-317-ridgeway.1618378/#post-18486883
 
Back
Top