Father & Son Traditional Sharpening
Knifemaker / Craftsman / Service Provider
- Joined
- Jun 11, 2012
- Messages
- 6,973
Busse Custom Shop
Spear Point Elmax Slicer Variant
- Broad Spear Point Blade Profile
- Hand Applied Satin Finish
- Dyed Giraffe Bone Inlays
- Hand Smoothed Black Canvas Micarta Bolster (G-Rex Style)
- Nickel/Stainless Hollow Pins w/ Clear Acrylic Fill
- A TRUE ONE OF A KIND!
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
"Blind Trough Warfare (BTW) is coming your way on Wednesday June 2, 2021 at 9PM Eastern!!!!!
The ELMAX customs coming out of the Crab Shack have been epic!
The demand for these has been off the charts and they have, typically, all sold out within the first 60 seconds!!!
So, what could possibly make scoring one of these Crab Shack Customs even more fun???
Well, as we all know, nothing is more fun or terrifying than Blind Trough Warfare!!! (BTW) . . . . We also know that BTW is not for the faint of heart!
If you decide to dive in to the trough, be prepared for a massacre!!!!
Couple all of this with a guaranteed minimum discount and you have the makings of a legendary"Blind Bacon Battle" that will go down in the history books as one of the greatest of all time!!!
And someday, when you're well above 100 yrs old and sitting in your rocking chair on the front porch of your home, your great, great, grandchildren will climb up on your lap, and look you in the eye with wonder and ask, "Tell me Paw Paw. . . were you there when only the most daring of HOGs dove into the trough completely Blind???? . . . . . Did you dive in Paw Paw? . . . Huh? . . . . Didja? " . . . At that moment, time will stand still, and you'll hold up your heavily scarred hoof and flash your battle chipped tusk and they'll know that they are in the presence of greatness!"
Specifications:
Over All Length: Approx. 8 1/8"
Blade Length: Approx. 3 5/8"
Blade Width (Widest Point): 1 7/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $340 + $14.95 Shipping = $354.95
Total Retail Value: $354.95
Asking $417 Shipped TYD via Regular Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE AT FORUM & DEAL WITH CONFIDENCE!!
200+ POSITIVE FEEDBACK'S & COUNTING!!
Busse Custom Shop
Swedged Harpoon Tip Elmax Slicer Variant
- Harpoon Blade Profile w/ Unsharpened Swedge Grind
- Hand Applied Satin Finish
- Black Carbon Fiber Inlays w/ Toxic Green G-10 Liner
- Hand Smoothed Tan Canvas Micarta Bolster (G-Rex Style)
- Translucent G-10 Pins
- A TRUE ONE OF A KIND!
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
"Blind Trough Warfare (BTW) is coming your way on Wednesday June 2, 2021 at 9PM Eastern!!!!!
The ELMAX customs coming out of the Crab Shack have been epic!
The demand for these has been off the charts and they have, typically, all sold out within the first 60 seconds!!!
So, what could possibly make scoring one of these Crab Shack Customs even more fun???
Well, as we all know, nothing is more fun or terrifying than Blind Trough Warfare!!! (BTW) . . . . We also know that BTW is not for the faint of heart!
If you decide to dive in to the trough, be prepared for a massacre!!!!
Couple all of this with a guaranteed minimum discount and you have the makings of a legendary"Blind Bacon Battle" that will go down in the history books as one of the greatest of all time!!!
And someday, when you're well above 100 yrs old and sitting in your rocking chair on the front porch of your home, your great, great, grandchildren will climb up on your lap, and look you in the eye with wonder and ask, "Tell me Paw Paw. . . were you there when only the most daring of HOGs dove into the trough completely Blind???? . . . . . Did you dive in Paw Paw? . . . Huh? . . . . Didja? " . . . At that moment, time will stand still, and you'll hold up your heavily scarred hoof and flash your battle chipped tusk and they'll know that they are in the presence of greatness!"
Specifications:
Over All Length: Approx. 8 1/2"
Blade Length: Approx. 4"
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $338 + $14.95 Shipping = $352.95
Total Retail Value: $352.95
Asking $417 Shipped TYD via Regular Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE AT FORUM & DEAL WITH CONFIDENCE!!
200+ POSITIVE FEEDBACK'S & COUNTING!!
Spear Point Elmax Slicer Variant
- Broad Spear Point Blade Profile
- Hand Applied Satin Finish
- Dyed Giraffe Bone Inlays
- Hand Smoothed Black Canvas Micarta Bolster (G-Rex Style)
- Nickel/Stainless Hollow Pins w/ Clear Acrylic Fill
- A TRUE ONE OF A KIND!
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
"Blind Trough Warfare (BTW) is coming your way on Wednesday June 2, 2021 at 9PM Eastern!!!!!
The ELMAX customs coming out of the Crab Shack have been epic!
The demand for these has been off the charts and they have, typically, all sold out within the first 60 seconds!!!
So, what could possibly make scoring one of these Crab Shack Customs even more fun???
Well, as we all know, nothing is more fun or terrifying than Blind Trough Warfare!!! (BTW) . . . . We also know that BTW is not for the faint of heart!
If you decide to dive in to the trough, be prepared for a massacre!!!!
Couple all of this with a guaranteed minimum discount and you have the makings of a legendary"Blind Bacon Battle" that will go down in the history books as one of the greatest of all time!!!
And someday, when you're well above 100 yrs old and sitting in your rocking chair on the front porch of your home, your great, great, grandchildren will climb up on your lap, and look you in the eye with wonder and ask, "Tell me Paw Paw. . . were you there when only the most daring of HOGs dove into the trough completely Blind???? . . . . . Did you dive in Paw Paw? . . . Huh? . . . . Didja? " . . . At that moment, time will stand still, and you'll hold up your heavily scarred hoof and flash your battle chipped tusk and they'll know that they are in the presence of greatness!"
Specifications:
Over All Length: Approx. 8 1/8"
Blade Length: Approx. 3 5/8"
Blade Width (Widest Point): 1 7/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $340 + $14.95 Shipping = $354.95
Total Retail Value: $354.95
Asking $417 Shipped TYD via Regular Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE AT FORUM & DEAL WITH CONFIDENCE!!
200+ POSITIVE FEEDBACK'S & COUNTING!!
Busse Custom Shop
Swedged Harpoon Tip Elmax Slicer Variant
- Harpoon Blade Profile w/ Unsharpened Swedge Grind
- Hand Applied Satin Finish
- Black Carbon Fiber Inlays w/ Toxic Green G-10 Liner
- Hand Smoothed Tan Canvas Micarta Bolster (G-Rex Style)
- Translucent G-10 Pins
- A TRUE ONE OF A KIND!
BRAND NEW!
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...-sunday-4-18-2021-at-9-00-pm-eastern.1785728/
"SliceOganzaaaa!!!!
All blades are made from ELMAX steel and have undergone our extensive heat-treat protocol designed specifically for maximum edge holding! They are coming in at 60-62 Rc. These ultra-thin slicers are .090" thick with an edge thickness of approximately .010" prior to sharpening!!!! That's about 3 sheets of paper thick prior to sharpening!!! Yowza!!!"
Excerpt From Jerry Busse : https://www.bladeforums.com/threads...nesday-june-2-2021-at-9-00pm-eastern.1792398/
"Blind Trough Warfare (BTW) is coming your way on Wednesday June 2, 2021 at 9PM Eastern!!!!!
The ELMAX customs coming out of the Crab Shack have been epic!
The demand for these has been off the charts and they have, typically, all sold out within the first 60 seconds!!!
So, what could possibly make scoring one of these Crab Shack Customs even more fun???
Well, as we all know, nothing is more fun or terrifying than Blind Trough Warfare!!! (BTW) . . . . We also know that BTW is not for the faint of heart!
If you decide to dive in to the trough, be prepared for a massacre!!!!
Couple all of this with a guaranteed minimum discount and you have the makings of a legendary"Blind Bacon Battle" that will go down in the history books as one of the greatest of all time!!!
And someday, when you're well above 100 yrs old and sitting in your rocking chair on the front porch of your home, your great, great, grandchildren will climb up on your lap, and look you in the eye with wonder and ask, "Tell me Paw Paw. . . were you there when only the most daring of HOGs dove into the trough completely Blind???? . . . . . Did you dive in Paw Paw? . . . Huh? . . . . Didja? " . . . At that moment, time will stand still, and you'll hold up your heavily scarred hoof and flash your battle chipped tusk and they'll know that they are in the presence of greatness!"
Specifications:
Over All Length: Approx. 8 1/2"
Blade Length: Approx. 4"
Blade Width (At Widest Part): 1 3/8"
Thickness: Approx. .090"
Steel: Elmax
Finish: Hand Applied Satin
Bevel: Flat Saber
Hardness: 60-62 Rc
Busse Combat Regular Retail Price: $338 + $14.95 Shipping = $352.95
Total Retail Value: $352.95
Asking $417 Shipped TYD via Regular Paypal or USPS Money Order
PLEASE SEE MY FEEDBACK HERE AT FORUM & DEAL WITH CONFIDENCE!!
200+ POSITIVE FEEDBACK'S & COUNTING!!
Last edited: