- Joined
- Apr 14, 2025
- Messages
- 4
I’m getting too old and need the space, I have 2- 2x72 AmeriBrade belt grinders on roller stands one is tilt base, multiple platens, work tables, contact wheels, a small wheel attachment and magnetic surfacing bar ( surface grinding attachment) both are 2 HP 110 volt with variable speed drives.
1- 2x72 Grizzly belt grinders with buff wheel.
1- LB18 Evenheat oven with digital control.
1- Grizzly 4”x16” mini mill.
1- Grizzly 17” wood- medal bandsaw inverter drive vari- speed, cast wheel and table, on Grizzly roll around base.
1- Majestic 3 burner propane forge.
1- Harbor Freight 17” floor drill press, I installed a Jacob’s chuck trued the spindle and replaced the drive belt.
1- Tandy ( made by Sailrite) leather sewing machine, HD variable speed motor, foot will raise to 3/8” will sew 5/16” leather.
1- 16 liter liquid nitrogen dewar.
1- HF 3 gal. pressure pot for casting, several moulds and some Alumilite.
1- 3 gal vacuum chamber with vacuum pump for stabilizing and some Cactus Juice.
About 50 new 2x72 belts, various grits.
2- Hollow ground jigs 1 is Jantz the other is custom made and several flat grinding jigs. Multiple sets of Jantz gemstone handle material, some 440C and CPM154CM bar stock, stainless bar stock for bolsters, stainless pin rounds 1/8” and3/16”. Leather tools, stamps, dyes, and about 2 shoulders of veg tanned leather.
A small table with HF vice and anvil, also spare blades for the bandsaw.
Craftsman 10” table saw cast iron table with cast iron extensions on Rigid roll around wheels.
Knife Dogs electro- etcher with original box and acids.
Everything would need to be picked up here, it is more than a pickup load, I am about 25 miles north of San Antonio.
All this equipment is in good working order with no known defects, I used it all to make multiple knives for Christmas gifts and it has been collecting dust since.
I am going to include some photos if anyone wants more specific pictures let me know.
$11,000. Picked up here, bring help.
1- 2x72 Grizzly belt grinders with buff wheel.
1- LB18 Evenheat oven with digital control.
1- Grizzly 4”x16” mini mill.
1- Grizzly 17” wood- medal bandsaw inverter drive vari- speed, cast wheel and table, on Grizzly roll around base.
1- Majestic 3 burner propane forge.
1- Harbor Freight 17” floor drill press, I installed a Jacob’s chuck trued the spindle and replaced the drive belt.
1- Tandy ( made by Sailrite) leather sewing machine, HD variable speed motor, foot will raise to 3/8” will sew 5/16” leather.
1- 16 liter liquid nitrogen dewar.
1- HF 3 gal. pressure pot for casting, several moulds and some Alumilite.
1- 3 gal vacuum chamber with vacuum pump for stabilizing and some Cactus Juice.
About 50 new 2x72 belts, various grits.
2- Hollow ground jigs 1 is Jantz the other is custom made and several flat grinding jigs. Multiple sets of Jantz gemstone handle material, some 440C and CPM154CM bar stock, stainless bar stock for bolsters, stainless pin rounds 1/8” and3/16”. Leather tools, stamps, dyes, and about 2 shoulders of veg tanned leather.
A small table with HF vice and anvil, also spare blades for the bandsaw.
Craftsman 10” table saw cast iron table with cast iron extensions on Rigid roll around wheels.
Knife Dogs electro- etcher with original box and acids.
Everything would need to be picked up here, it is more than a pickup load, I am about 25 miles north of San Antonio.
All this equipment is in good working order with no known defects, I used it all to make multiple knives for Christmas gifts and it has been collecting dust since.
I am going to include some photos if anyone wants more specific pictures let me know.
$11,000. Picked up here, bring help.
