Kershaw Deep carry clip option for Dividend?

cnm123

cnm123

Joined
Sep 7, 2015
Messages
1,429
Like the title says. Maybe even a shorty clip
It's not a big deal just curious. I'm sure this is not the only knife Kershaw makes that uses this 2 screw vertical setup.
HJoHVEQ.jpg

BTW, the M390 version is awesome ! It almost hasn't left my pocket for about 3 weeks since I got it (lost a day or 2 when I got the new Bugout)
 
MXG gear has some vertical ZT clips that should work. A lot of the new budget Kershaw knives such as the Natrix have vertical deep carry clips. Ask Kershaw if they can send you a 'House of Blades' Kershaw Link deep pocket clip.

I forget which knife model some of these are for except the two Link clips. Screws are a little different.
kWHR4kC.jpg
 
Apologies for resurrecting an older thread, but I too was interested in a deep carry clip for the Dividend. I wrote to Kershaw through their website asking where I might be able to purchase one. They ended up sending one free of charge! It is slightly thinner and shorter than the standard clip, but fits the knife great and looks excellent on my black M390 version.
 
If you search Dividend on MXGs site one middle of clip comes up that will fit. It’s one that will also work for the ZT0450
 
Coyja said:
If you search Dividend on MXGs site one middle of clip comes up that will fit. It’s one that will also work for the ZT0450
Click to expand...
Nice! Thanks for sharing. I had searched for some aftermarket stuff and only found stuff that was a bit too flashy for me.
 
kickert said:
Nice! Thanks for sharing. I had searched for some aftermarket stuff and only found stuff that was a bit too flashy for me.
Click to expand...
No problem. I had just looked this up myself over the weekend because I'm thinking the M390 version will be my first purchase of 2019.
That knife is begging for a DC clip and IDK why they wouldn't just be stock on it.
 
I have the deep carry clip Kershaw sent, but haven't been able to install it because I am waiting on the correct Torx bit. Give me till the end of the week and I will post a pic.
 
Here is my Kershaw Dividend with the deep carry clip that was provided directly from the company. It would be hard to make a 3" blade less conspicuous. I was worried that with the clip being so far down the scales it would throw feel off a bit, but it palms excellently.

NMk57br.jpg
 
kickert said:
Here is my Kershaw Dividend with the deep carry clip that was provided directly from the company. It would be hard to make a 3" blade less conspicuous. I was worried that with the clip being so far down the scales it would throw feel off a bit, but it palms excellently.

NMk57br.jpg
Click to expand...
Thanks for the inspiration! Just wrote them and requested to buy a couple deep carry clips. Could you tell me how long it took you to get it after you put in your request?

Thanks!
 
Georgeib said:
Thanks for the inspiration! Just wrote them and requested to buy a couple deep carry clips. Could you tell me how long it took you to get it after you put in your request?

Thanks!
Click to expand...
They were super fast. I think they told me something like 2-3 weeks, but I had it in less than a week... and this was right around the holidays. Great service!
 
I can also confirm that it took about a week to get mine! Called them, and the order was placed in less than 5 minutes! Very professional experience overall.
 
yamsi12 said:
Anyone know what Kershaw knife that deep carry clip is from?
Click to expand...

Georgeib said:
I don't know what other Kershaw knives it's on, but in looking around online, I see that Kershaw actually has the deep carry clip on the S35vn version of the Dividend 1812.

https://www.houseofblades.com/kersh...-back-the-blue-blue-blackwash-assisted-knife/
Click to expand...

yamsi12 said:
Looks like the clip is from the Atmos.
Click to expand...

I am pretty sure the clip was developed as an exclusive option for the Link and Dividend. The HoB that Georgeib talks about is the first place I saw it.

I am also fairly confident it is not exact same clip as the atmos pictured above. You can see the whole in the clip of the atmos is more flared at the top, while the one I have is symmetrical.
 
I know this is a older thread but thought I'd add some info about the deep carry clip swap. I have an Atmos and just tried the clip on my dividend and the screw holes are slightly off. Its close but you'll have to open one hole up a little bit to use the atmos clip but it does fit well otherwise. I think I'm just gonna email Kershaw though for the HOB deep clip as The dividend clip wont interchange onto The atmos due to its cut out in the scale Being too narrow.
 
Just emailed Kershaw and requested a deep carry clip for my dividend and link m390s. About a year ago i requested a new pocket clip and pivot screw for a Kershaw blur and they sent me out a whole bunch of free parts zero cost to me. Awesome customer service From KAI Kershaw!
 
IMG_6402.JPG Awesome customer service from KAI/Kershaw once again! Looks like the HOB versions which originally they said they didnt have any so i requested a couple atmos clips and would make them work. Ended up getting the ones i wanted after all though! The link fits nice while the dividend clip sits a little above the scale but they both carry nice and deep now. This is the same clip i have on my bareknuckle also which provides better purchase compared to the short stock clip while deploying with its subframe lock being so wide and trying to keep fingers away from the lockbar.
 
Edgeoflife said:
View attachment 1176801 Awesome customer service from KAI/Kershaw once again! ...
Click to expand...

I just picked up the phone and gave them a call. They were happy to help. They shipped me the same deep-carry loop-over free of charge. I think I had it within a week.

I use mine for tip-down in a shirt pocket. It sticks up off the scale a little but that lets it catch the top of my pocket just right. Even with the logo, it looks like a pen clip. (If you don't want the logo and have a Tangram Amarillo, that clip also fits the Dividend.) Interestingly, the spot where the loop heads up a little beyond the scale can provide some additional thumb purchase. Overall, this is probably my favorite knife to wear clipped in a shirt pocket.
 
You must log in or register to reply here.
Back
Top