Hello BladeForums!
I hope you are all having a weekend!
Up for sale today are a BUNCH of really great knives!
I ship everything either USPS First Class, or Priority (depending on speed).
First up is a limited edition, GiantMouse Ace Tribeca in green anodized titanium, and CPM-MagnaCut. This was a very limited run by GiantMouse of only 200 pieces, and it has been sold out for a while now. This knife features a 2.875" CPM-MagnaCut blade, titanium scales, steel liner lock, ceramic bearings, and absolutely fantastic action! This knife was very well made by the craftsman in Maniago, Italy. This knife has been carried a couple of times, but look new. Fantastic condition!
Comes with the knife, pouch, and box.
I am asking $190 Shipped for the limited edition, GiantMouse Ace Tribeca in titanium and MagnaCut.
Next is a Hinderer XM-18 3" Wharncliffe with a CPM-20CV blade. This is the Tri-Way model and is running on Skiff bearings (comes with the original bearings, as well as the Teflon and phosphor-bronze washers). Action is fantastic! This features the "working finish" and has been upgraded with an OEM Hinderer textured titanium scale, as well as a FULL set of OEM Hinderer blue titanium hardware (comes with the original stainless steel hardware too)... As well as blue anodized titanium hardware from Blades We Love for the clip and insert (since Hinderer doesn't make those). Professionally sharpened by Josh of REK Knives. This thing is SHARP!!! Also comes with a couple extra pieces of blue hardware that were sent by Hinderer as replacements for a couple of tight fitting handle nuts.
Comes with the knife, original box, and upgraded hardware (plus original stainless hardware).
I am asking $550 Shipped for the Hinderer XM-18 3" Wharncliffe with upgraded titanium show scale and titanium hardware.
Next is a Solingen made Boker TRPPR in CPM-MagnaCut (62 - 63hrc) and black dyed, stabilized amboyna burl! This knife features great action running on bearings (detent is very light), and a titanium integral framelock, with a stainless steel overtravel stop/lockbar insert, and a titanium pocket clip. This is one beautiful and elegant knife! This knife has been carried a few times, but is in absolutely immaculate condition!
Comes with the knife, box, zipper pouch, microfiber bag, and paperwork.
I am asking $190 Shipped for the Boker TRPPR in Magnacut, black amboyna burl, and titanium.
Next up is a Spyderco Urban sprint run in Ivory G10 and Bjorkman's Twist Damasteel powdered damascus! This knife also features a deep carry wire clip, and a full length steel backspacer. This knife has been carried a few times but is in fantastic condition!
Discount on the RGT Ghost Timascus clip with this knife!
Comes with just the knife, no box.
I am asking $175 Shipped for the Spyderco Urban in Damasteel and ivory G10.
Next we have a Benchmade 945 Mini Osborne with some really cool upgrades! This knife features a professionally made, custom CPM-MagnaCut blade, Rockscale design titanium "Critter" scales, and an upgraded OEM Benchmade deep carry clip, and a full 21-piece set of blue anodized titanium hardware from xxxadrenalinxxx, including stop pin, standoffs, and thumbstud. Also comes with the original clip, hardware, and scales (no blade). Action is good. Centering is good. This knife has been carried a bit, but is in superb condition.
Comes with the knife, box, microfiber bag, upgraded scales/hardware/clip + original scales/hardware/clip.
I am asking $375 Shipped for the Benchmade 945 Mini Obsborne with custom MagnaCut blade and titanium scales/hardware.
Last up is a Demko AD20.5 with a CPM-3V sharksfoot blade, smooth titanium scales, upgraded Lynch NW titanium deep carry clip, Skiff bearings, and one WILD anodizing job!!! This is the version that comes stock with titanium scales and the large pivot. The anodizing has been professionally done by BladesWeLove. Also comes with a brand new, unused Flytanium titanium thumb stud. The original thumb stud has some damage from locking pliers slipping in an attempt to remove it (shown in picture). This knife has been carried a bit, but is in excellent condition.
Comes with the knife, box, Flytanium thumbstud, upgraded clip, and original clips.
I am asking$300 Shipped SOLD! for the Demko AD20.5 in CPM-3V and anodized titanium.
Last up is a Spyderco Delica K390 Wharncliffe with upgraded, custom scales from RC Bladeworks, polished OEM Spyderco clip, Flytanium titanium backspacer, and bonus Micarta backspacer. This knife is awesome! The scales were made with blue canvas Micarta with a Mexican Blanket Ridgeback G-Carta inlay! The titanium backspacer gives the knife a really nice balance. This knife has been carried a bit, and does have the start of a patina on the blade. It is in very good condition though.
Comes with the knife, box, and bonus blue canvas Micarta backspacer.
I am asking $150 Shipped for the Spyderco Delica Wharncliffe in K390 and custom scales/backspacer.
Alright, that's all I have for you today. Thanks for looking and have a great day!
I hope you are all having a weekend!
Up for sale today are a BUNCH of really great knives!
I ship everything either USPS First Class, or Priority (depending on speed).
First up is a limited edition, GiantMouse Ace Tribeca in green anodized titanium, and CPM-MagnaCut. This was a very limited run by GiantMouse of only 200 pieces, and it has been sold out for a while now. This knife features a 2.875" CPM-MagnaCut blade, titanium scales, steel liner lock, ceramic bearings, and absolutely fantastic action! This knife was very well made by the craftsman in Maniago, Italy. This knife has been carried a couple of times, but look new. Fantastic condition!
Comes with the knife, pouch, and box.
I am asking $190 Shipped for the limited edition, GiantMouse Ace Tribeca in titanium and MagnaCut.
Next is a Hinderer XM-18 3" Wharncliffe with a CPM-20CV blade. This is the Tri-Way model and is running on Skiff bearings (comes with the original bearings, as well as the Teflon and phosphor-bronze washers). Action is fantastic! This features the "working finish" and has been upgraded with an OEM Hinderer textured titanium scale, as well as a FULL set of OEM Hinderer blue titanium hardware (comes with the original stainless steel hardware too)... As well as blue anodized titanium hardware from Blades We Love for the clip and insert (since Hinderer doesn't make those). Professionally sharpened by Josh of REK Knives. This thing is SHARP!!! Also comes with a couple extra pieces of blue hardware that were sent by Hinderer as replacements for a couple of tight fitting handle nuts.
Comes with the knife, original box, and upgraded hardware (plus original stainless hardware).
I am asking $550 Shipped for the Hinderer XM-18 3" Wharncliffe with upgraded titanium show scale and titanium hardware.
Next is a Solingen made Boker TRPPR in CPM-MagnaCut (62 - 63hrc) and black dyed, stabilized amboyna burl! This knife features great action running on bearings (detent is very light), and a titanium integral framelock, with a stainless steel overtravel stop/lockbar insert, and a titanium pocket clip. This is one beautiful and elegant knife! This knife has been carried a few times, but is in absolutely immaculate condition!
Comes with the knife, box, zipper pouch, microfiber bag, and paperwork.
I am asking $190 Shipped for the Boker TRPPR in Magnacut, black amboyna burl, and titanium.
Next up is a Spyderco Urban sprint run in Ivory G10 and Bjorkman's Twist Damasteel powdered damascus! This knife also features a deep carry wire clip, and a full length steel backspacer. This knife has been carried a few times but is in fantastic condition!
Discount on the RGT Ghost Timascus clip with this knife!
Comes with just the knife, no box.
I am asking $175 Shipped for the Spyderco Urban in Damasteel and ivory G10.
Next we have a Benchmade 945 Mini Osborne with some really cool upgrades! This knife features a professionally made, custom CPM-MagnaCut blade, Rockscale design titanium "Critter" scales, and an upgraded OEM Benchmade deep carry clip, and a full 21-piece set of blue anodized titanium hardware from xxxadrenalinxxx, including stop pin, standoffs, and thumbstud. Also comes with the original clip, hardware, and scales (no blade). Action is good. Centering is good. This knife has been carried a bit, but is in superb condition.
Comes with the knife, box, microfiber bag, upgraded scales/hardware/clip + original scales/hardware/clip.
I am asking $375 Shipped for the Benchmade 945 Mini Obsborne with custom MagnaCut blade and titanium scales/hardware.
Last up is a Demko AD20.5 with a CPM-3V sharksfoot blade, smooth titanium scales, upgraded Lynch NW titanium deep carry clip, Skiff bearings, and one WILD anodizing job!!! This is the version that comes stock with titanium scales and the large pivot. The anodizing has been professionally done by BladesWeLove. Also comes with a brand new, unused Flytanium titanium thumb stud. The original thumb stud has some damage from locking pliers slipping in an attempt to remove it (shown in picture). This knife has been carried a bit, but is in excellent condition.
Comes with the knife, box, Flytanium thumbstud, upgraded clip, and original clips.
I am asking
Last up is a Spyderco Delica K390 Wharncliffe with upgraded, custom scales from RC Bladeworks, polished OEM Spyderco clip, Flytanium titanium backspacer, and bonus Micarta backspacer. This knife is awesome! The scales were made with blue canvas Micarta with a Mexican Blanket Ridgeback G-Carta inlay! The titanium backspacer gives the knife a really nice balance. This knife has been carried a bit, and does have the start of a patina on the blade. It is in very good condition though.
Comes with the knife, box, and bonus blue canvas Micarta backspacer.
I am asking $150 Shipped for the Spyderco Delica Wharncliffe in K390 and custom scales/backspacer.
Alright, that's all I have for you today. Thanks for looking and have a great day!
Last edited:
