- Joined
- Oct 19, 2005
- Messages
- 19,687
As always, my first priority is to thank all of you. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.
And introducing a new finish on the flats of the SS knives and some of the 01 knives that I am calling Fiddleback Textured Flats. Fiddltextured for short. I think it makes them look a lot more my style. I’ve been working on this for a while, and I hope you like it.
Even though we are growing, please be sure that every knife that has my initials has been hand ground by me. Also, the handle shapes are mine alone. Honestly, right now I have my hands in every process. But I wanted y’all to know that I’m not marking knives with my name that aren’t made by me.
The prices this week are without sheaths. I am lucky enough to work with Rick Lowe and Heber Ellsworth for my sheaths. The make beautiful sheaths that really compliment my work. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and CPM 154CM with Fiddleback Textured Flats.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. Ken has taken over the shipping department and he got the packages out on Tuesday this week. He is also doing the packing and wrapping, which had been getting done by a part time helper. I think the packages this week were as good as when I used to do them myself or even better maybe. There is going to be a special e-mail address for all questions or concerns regarding shipping. I’ll give that out when the new website is launched. Please help us help you by describing your purchase in the payment notes section.
Small knives – This week I have a good mix of small knives. Actually, there are a couple below with the SS knives as well, but these 01 ones are super nice! AND, matching Runts!!
2013 1115 001 – Runt, OD canvas over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $195 SOLD
2013 1115 002 - Runt, OD canvas over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $195 SOLD
2013 1115 003 – Karda, Arizona Desert Ironwood over black g10 with wide white g10 whitewalls, SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $185 SOLD
2013 1115 004 - Hiking Buddy, Crotch Walnut over black g10 with a white g10 pinstripe, SFT Tang (Skeletonized Full Thickness Tang), Convex on 1/8” thick 3D spalted 01 steel - $230 SOLD
2013 1115 005 – EDCII, Paduk over black g10 with a wide white g10 whitewalls, Tapered Tang, Convex on 1/8” thick Fiddltextured 01 steel - $270
Stainless Steel – I have seven knives made from CPM 154cm steel for sale today! How’s that for boosting SS production. I love the Fiddltexturing, so you’re going to see more and more SS. All of these knives have skeletonized full thickness tangs and Fiddltextured flats.
2013 1115 006 – Hiking Buddy, Cornflower blue g10 over natural canvas with wide white g10 whitewalls, SFT Tang, Convex on 1/8” thick Fiddltextured CPM154CM steel - $290 SOLD
2013 1115 007 – EDCII, Cornflower blue g10 over natural canvas with wide white g10 whitewalls, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $290 SOLD
2013 1115 008 – Sneaky Pete, Maroon linen over natural canvas micarta with a white g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $315
2013 1115 009 - Sneaky Pete, Stabilized and dyed Lacewood over black g10 with a blue g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $315 SOLD
2013 1115 010 – Bushfinger, Emerald Green burlap micarta from shadetree over black g10 with a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $315 SOLD
2013 1115 011 - Bushfinger, Stabilized Black Ash burl over black g10 with a white g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $335
2013 1115 012 - Bushfinger, Osage Orange over black g10 with an orange g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $315
4” bladed Bushcrafting knives!
2013 1115 013 – Bushfinger (one of the last Scandi’s!), Stabilized and dyed Lacewood over black g10 with a lime green g10 pinstripe, SFT Tang, Scandi on 1/8” thick 3D Spalted 01 steel - $255
2013 1115 014 – Recluse (super lightweight), Tuxedo, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $265 SOLD
2013 1115 015 – Recluse, Drunken Burlap micarta from shadetree over black g10 with a thick orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
2013 1115 016 – Kephart, Arizona Desert Ironwood over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
Nessmuks! Two beauties! And a really pretty guardless Woodchuck too.
2013 1115 017 – Guardless Woodchuck, Osage Orange over black g10 with an orange g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $255 SOLD
2013 1115 018 – Nessmuk, Bocote over natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255
2013 1115 019 - Nessmuk, Red Burlap from shadetree over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $295 SOLD
Hunter, Woodsman and two Dukes! Man, I am very partial to all of these knives. The Oak on the Woodsman and the Osage and Box Elder here are just too much for me.
2013 1115 020 – Woodsman, Stabilized curly quartersawn Oak over black g10 with a lime green g10 pinstripe, THICK SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $350 SOLD
2013 1115 021 – Duke, Osage Orange over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $370
2013 1115 022 – Duke, Stabilized Box Elder burl over black g10 with a lime green g10 pinstripe, THICK SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $350 SOLD
2013 1115 023 – Hunter, Antique Canvas on natural canvas with thick white g10 whitewalls, Convex on 5/32” thick 01 steel - $340
Thank you for your interest folks.
And introducing a new finish on the flats of the SS knives and some of the 01 knives that I am calling Fiddleback Textured Flats. Fiddltextured for short. I think it makes them look a lot more my style. I’ve been working on this for a while, and I hope you like it.
Even though we are growing, please be sure that every knife that has my initials has been hand ground by me. Also, the handle shapes are mine alone. Honestly, right now I have my hands in every process. But I wanted y’all to know that I’m not marking knives with my name that aren’t made by me.
The prices this week are without sheaths. I am lucky enough to work with Rick Lowe and Heber Ellsworth for my sheaths. The make beautiful sheaths that really compliment my work. I appreciate your support for them as well.
The steel this week is 3D Spalted 01 steel and CPM 154CM with Fiddleback Textured Flats.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
Shipping is included within the US. Ken has taken over the shipping department and he got the packages out on Tuesday this week. He is also doing the packing and wrapping, which had been getting done by a part time helper. I think the packages this week were as good as when I used to do them myself or even better maybe. There is going to be a special e-mail address for all questions or concerns regarding shipping. I’ll give that out when the new website is launched. Please help us help you by describing your purchase in the payment notes section.
Small knives – This week I have a good mix of small knives. Actually, there are a couple below with the SS knives as well, but these 01 ones are super nice! AND, matching Runts!!
2013 1115 001 – Runt, OD canvas over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $195 SOLD
2013 1115 002 - Runt, OD canvas over natural canvas with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $195 SOLD
2013 1115 003 – Karda, Arizona Desert Ironwood over black g10 with wide white g10 whitewalls, SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $185 SOLD
2013 1115 004 - Hiking Buddy, Crotch Walnut over black g10 with a white g10 pinstripe, SFT Tang (Skeletonized Full Thickness Tang), Convex on 1/8” thick 3D spalted 01 steel - $230 SOLD
2013 1115 005 – EDCII, Paduk over black g10 with a wide white g10 whitewalls, Tapered Tang, Convex on 1/8” thick Fiddltextured 01 steel - $270
Stainless Steel – I have seven knives made from CPM 154cm steel for sale today! How’s that for boosting SS production. I love the Fiddltexturing, so you’re going to see more and more SS. All of these knives have skeletonized full thickness tangs and Fiddltextured flats.
2013 1115 006 – Hiking Buddy, Cornflower blue g10 over natural canvas with wide white g10 whitewalls, SFT Tang, Convex on 1/8” thick Fiddltextured CPM154CM steel - $290 SOLD
2013 1115 007 – EDCII, Cornflower blue g10 over natural canvas with wide white g10 whitewalls, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $290 SOLD
2013 1115 008 – Sneaky Pete, Maroon linen over natural canvas micarta with a white g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $315
2013 1115 009 - Sneaky Pete, Stabilized and dyed Lacewood over black g10 with a blue g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $315 SOLD
2013 1115 010 – Bushfinger, Emerald Green burlap micarta from shadetree over black g10 with a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick Fiddltextured CPM154CM steel - $315 SOLD
2013 1115 011 - Bushfinger, Stabilized Black Ash burl over black g10 with a white g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $335
2013 1115 012 - Bushfinger, Osage Orange over black g10 with an orange g10 pinstripe, SFT Tang, Convex on THICK 5/32” thick Fiddltextured CPM154CM steel - $315
4” bladed Bushcrafting knives!
2013 1115 013 – Bushfinger (one of the last Scandi’s!), Stabilized and dyed Lacewood over black g10 with a lime green g10 pinstripe, SFT Tang, Scandi on 1/8” thick 3D Spalted 01 steel - $255
2013 1115 014 – Recluse (super lightweight), Tuxedo, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $265 SOLD
2013 1115 015 – Recluse, Drunken Burlap micarta from shadetree over black g10 with a thick orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
2013 1115 016 – Kephart, Arizona Desert Ironwood over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
Nessmuks! Two beauties! And a really pretty guardless Woodchuck too.
2013 1115 017 – Guardless Woodchuck, Osage Orange over black g10 with an orange g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $255 SOLD
2013 1115 018 – Nessmuk, Bocote over natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255
2013 1115 019 - Nessmuk, Red Burlap from shadetree over natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $295 SOLD
Hunter, Woodsman and two Dukes! Man, I am very partial to all of these knives. The Oak on the Woodsman and the Osage and Box Elder here are just too much for me.
2013 1115 020 – Woodsman, Stabilized curly quartersawn Oak over black g10 with a lime green g10 pinstripe, THICK SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $350 SOLD
2013 1115 021 – Duke, Osage Orange over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $370
2013 1115 022 – Duke, Stabilized Box Elder burl over black g10 with a lime green g10 pinstripe, THICK SFT Tang, Convex on 3/16” thick 3D Spalted 01 steel - $350 SOLD
2013 1115 023 – Hunter, Antique Canvas on natural canvas with thick white g10 whitewalls, Convex on 5/32” thick 01 steel - $340
Thank you for your interest folks.
Last edited:
