- Joined
- Dec 6, 2013
- Messages
- 2,782
Mostly interested in hoodies made of wool and boots. Also interested in hoodies from high end makers. Scrapyard in sr77 and regulators. Benchmade grips in d2, 154cm, m390 and 20cv.
https://imgur.com/a/q7BKkO0
Crawford Hawkbill Intregral -3.5" bead blasted blade. Handles are made from one piece of 1/4" thick 440C. I have carried it twice, has some minor snail trails. Snaps open with authority, very sharp.
Has the original edge $369 Now $349
Matthew Cody Hawkbill- 3 1/4" acid washed 3v blade,OAL is 7 3/4", liners are ti and the scales are coyote brown G10. Has been carried and used lightly, edge is original. No blade play, flicks open easily and is centered. Pocket clip is ti also- $319 Now $305
White Wolves/Woodard Combat Auto- 4" Blade. Aluminum handles. Has not been carried or used. Comes with a belt sheath. Fires hard and no blade play-$250
https://imgur.com/a/w1CXkvl
https://imgur.com/a/RaPsj5A
SW R9 Military Proto from Cabo Wabo- Black coated blade, scales are black paper. Has not been carried, used or sharpened
SW R6 Variant from Cabo Wabo- Camo coated blade, scales are tan micarta. Top swedge is sharpened. Has not been carried, used or sharpened. Mint condition. Comes with cardboard-
Busse/Scrapyard Infi-Hack 1 of 12-War dog varient, Satin blade,high double hollow ground, Resiprene C handles. 4" blade, little over 8" OAL. Unused, uncarried and unsharpened. Has some marks on the blade from not having the inclusions fully buffed out. Looks fine, just thought i'd mention it-SOLD
https://imgur.com/a/Wlzua72
GG&G Hawk- Black s7 coated blade 3/8" thick. Only has one spot where the finish is peeling. Black g10 scales. Has not been used, carried or sharpened. Comes with sheath
Custom Hawk- roughly 5/16" ultrafort head. OAL is 14" or so. Satin flats, semi mirror bevels. Roughly 7 1/2" oal for the head, the edge is just under 3". Handle is a single piece of red annodized aluminum. Fills my meduim hands well. Has replaceable rubber rings to assist in grip. Hardware is Ti. It's a breaching/rescue axe so the edge isn't sharpened. No sheath. Has not ben used, carried or sharpened
https://imgur.com/a/q7BKkO0
Crawford Hawkbill Intregral -3.5" bead blasted blade. Handles are made from one piece of 1/4" thick 440C. I have carried it twice, has some minor snail trails. Snaps open with authority, very sharp.
Has the original edge $369 Now $349
Matthew Cody Hawkbill- 3 1/4" acid washed 3v blade,OAL is 7 3/4", liners are ti and the scales are coyote brown G10. Has been carried and used lightly, edge is original. No blade play, flicks open easily and is centered. Pocket clip is ti also- $319 Now $305
White Wolves/Woodard Combat Auto- 4" Blade. Aluminum handles. Has not been carried or used. Comes with a belt sheath. Fires hard and no blade play-$250
https://imgur.com/a/w1CXkvl
https://imgur.com/a/RaPsj5A
SW R9 Military Proto from Cabo Wabo- Black coated blade, scales are black paper. Has not been carried, used or sharpened
SW R6 Variant from Cabo Wabo- Camo coated blade, scales are tan micarta. Top swedge is sharpened. Has not been carried, used or sharpened. Mint condition. Comes with cardboard-
Busse/Scrapyard Infi-Hack 1 of 12-War dog varient, Satin blade,high double hollow ground, Resiprene C handles. 4" blade, little over 8" OAL. Unused, uncarried and unsharpened. Has some marks on the blade from not having the inclusions fully buffed out. Looks fine, just thought i'd mention it-SOLD
https://imgur.com/a/Wlzua72
GG&G Hawk- Black s7 coated blade 3/8" thick. Only has one spot where the finish is peeling. Black g10 scales. Has not been used, carried or sharpened. Comes with sheath
Custom Hawk- roughly 5/16" ultrafort head. OAL is 14" or so. Satin flats, semi mirror bevels. Roughly 7 1/2" oal for the head, the edge is just under 3". Handle is a single piece of red annodized aluminum. Fills my meduim hands well. Has replaceable rubber rings to assist in grip. Hardware is Ti. It's a breaching/rescue axe so the edge isn't sharpened. No sheath. Has not ben used, carried or sharpened
Last edited: