- Located in Europe
- Prices are all in (PP G&S / Standard Int'l Shipping)
- No trades
FOLDERS:
1. Spyderco Positron Knifecenter Exclusive SOLD
Only been handled a few times but has not been used/carried at all.
2. Spyderco C64JBORE Meerkat Sprint Run (HAP40/SUS410 Steel) SOLD
First owner. On the back side of the folder there is some glue/resin and also the lamination line is not straight on one side of the blade. This is how the knife came to me and because i purchased it from the USA it didn't worth it to send it back. There are a few stains that were developed on the steel liner. I have highlighted the spots and the glue spill in one of the pictures. The knife has not been used to cut anything.
3. Zero Tolerance 0450 SOLD
This was my EDC for a month or so, used it for food and to open boxes.
I have taken this apart a few times to clean it.
It does look really good, no obvious wear that i can see. Full box.
4. Zero Tolerance 0562 SOLD (elsewhere)
I am the second owner, got it well used, and it does show wear (G10, Clip, Blade, Box). I have taken this apart a few times to clean it and I have sharpened it with a Lansky sharpener (approx. 20 degrees per side). There are some rust stains on the steel liners (underneath the scales)
5. Zero Tolerance 0220 SOLD
Brand new, never used, it has only been handled (the clip and the box have some marks but that is how the knife came). Full box.
6. Zero Tolerance 0393 SOLD
Again, it has only been handled a few times but never saw any use. Full box.
FIXED BLADES:
1. Fallkniven A1 SOLD
This was my second A1 as a replacement to the user one i have, but it seems that i won't use it so here it goes. Never been used
2. Fallkniven S1 (Black-coated blade) SOLD
Second owner. I haven't used it at all and i believe the first owner didn't either, but there are markings on the coating from sheathing the knife (at the edges of the swedge where it comes in contact with the sheath). I tried to capture them in the photos. The box shows wear from storage. Some markings also on the handle again from sheathing/handling.
3. TOPS Longhorn Bowie SOLD
I am the first owner. It stayed sealed in the nylon cover for a while before i opened it, and this is what it looked like when i got it out of the sheath.
These rust patterns, interestingly enough, are only formed on the softer side of the steel, and the general pattern reminded me of the Lichtenberg fractal patterns on wood!
I tried to get the rust off using the abrasive side of a kitchen sponge but nothing happened, except that i managed to leave a slight scratch/shining spot on the blade. I have been treating it with oil since and the rust has not spread.
I have used this to hack and chop wood, feathersticking, and for light batoning.
There are also two small scratches/hits on the micarta.
The sheath looks new. It comes with the TOPS emergency whistle and the authenticity card (which is blank!).
https://imgur.com/a/Z3ZAcCx
4. Stedemon Uncle One SOLD
First owner, never used it.
https://www.knifecenter.com/item/SK...lade-orange-g10-handles-molded-polymer-sheath
https://imgur.com/a/IkM86xH
- Prices are all in (PP G&S / Standard Int'l Shipping)
- No trades
FOLDERS:
1. Spyderco Positron Knifecenter Exclusive SOLD
Only been handled a few times but has not been used/carried at all.
2. Spyderco C64JBORE Meerkat Sprint Run (HAP40/SUS410 Steel) SOLD
First owner. On the back side of the folder there is some glue/resin and also the lamination line is not straight on one side of the blade. This is how the knife came to me and because i purchased it from the USA it didn't worth it to send it back. There are a few stains that were developed on the steel liner. I have highlighted the spots and the glue spill in one of the pictures. The knife has not been used to cut anything.
3. Zero Tolerance 0450 SOLD
This was my EDC for a month or so, used it for food and to open boxes.
I have taken this apart a few times to clean it.
It does look really good, no obvious wear that i can see. Full box.
4. Zero Tolerance 0562 SOLD (elsewhere)
I am the second owner, got it well used, and it does show wear (G10, Clip, Blade, Box). I have taken this apart a few times to clean it and I have sharpened it with a Lansky sharpener (approx. 20 degrees per side). There are some rust stains on the steel liners (underneath the scales)
5. Zero Tolerance 0220 SOLD
Brand new, never used, it has only been handled (the clip and the box have some marks but that is how the knife came). Full box.
6. Zero Tolerance 0393 SOLD
Again, it has only been handled a few times but never saw any use. Full box.
FIXED BLADES:
1. Fallkniven A1 SOLD
This was my second A1 as a replacement to the user one i have, but it seems that i won't use it so here it goes. Never been used
2. Fallkniven S1 (Black-coated blade) SOLD
Second owner. I haven't used it at all and i believe the first owner didn't either, but there are markings on the coating from sheathing the knife (at the edges of the swedge where it comes in contact with the sheath). I tried to capture them in the photos. The box shows wear from storage. Some markings also on the handle again from sheathing/handling.
3. TOPS Longhorn Bowie SOLD
I am the first owner. It stayed sealed in the nylon cover for a while before i opened it, and this is what it looked like when i got it out of the sheath.
These rust patterns, interestingly enough, are only formed on the softer side of the steel, and the general pattern reminded me of the Lichtenberg fractal patterns on wood!
I tried to get the rust off using the abrasive side of a kitchen sponge but nothing happened, except that i managed to leave a slight scratch/shining spot on the blade. I have been treating it with oil since and the rust has not spread.
I have used this to hack and chop wood, feathersticking, and for light batoning.
There are also two small scratches/hits on the micarta.
The sheath looks new. It comes with the TOPS emergency whistle and the authenticity card (which is blank!).
https://imgur.com/a/Z3ZAcCx
4. Stedemon Uncle One SOLD
First owner, never used it.
https://www.knifecenter.com/item/SK...lade-orange-g10-handles-molded-polymer-sheath
https://imgur.com/a/IkM86xH
Last edited: