sharp_edge
Gold Member
- Joined
- Jul 30, 2015
- Messages
- 5,936
CONUS only. PayPal G&S only. Prices include fees of USPS priority shipping within 24 hours of payment, full insurance, and signature confirmation (as I see needed). First unconditional "I'll take xxx" gets the knife although I reserve my right to not deal. Prompt payment expected. PM or email questions or requests. Please post only "I'll take xxx" in this thread.
I'm downsizing my collection and have become pickier with knives. For trades I am ONLY interested in LNIB Hinderer XM-18 3.5" titanium hardware (blue or bronze) and smooth titanium or cf scales, LNIB ZT 0562TI (with or without blue or bronze titanium hardware), and lightly used or better 8" DMT DiaSharp stones.
Knives are still available unless marked SOLD.
All knives come with the original factory box, literature, etc. Prices are as follows. Please read the rest for detailed descriptions and pictures.
- Hinderer XM-18 3.5" Spanto gen 4: SOLD
- KW exclusive PM2 M4 CF: SOLD
- KW exclusive Military 204p: SOLD
- Spyderco Manix 2 s110v: SOLD
- ZT 0562 Elmax: SOLD
- ZT 0801 with full ti hardware/clip: $130 --> $120.
1. Hinderer XM-18 3.5" Spanto gen 4. 2nd owner. Has been used very sparely in house but never carried or sharpened. Currently on PB washers (factory teflon washers will be included). Medium+ detent. Flips reliably and well. Other than a couple of VERY faint hairline scratches (see the 1st picture on the linked page) there is no other wears, scratches, or dings. The edge is still factory. The working finish ti and stonewashed blade are great color combo imo. The blade is centered with no play in any direction. If you prefer, I can replace the factory sand color scale with an OD green scale or a dark green scale (they are all LNIB).
More pictures at:
===================
6. ZT 0801 purple ano plus full ti hardware. Used and sharpened but no carried. Super smooth, no blade play. Light wear on handle and blade but nothing deep. The full ti hardware (pivot set, lockbar insert screw, LBS screw, body screws, standoffs) and pocket clip cost $100+, though the head of the screw near the lanyard hole on the presentation side is stripped but sits tight in the scale (does not affect disassemble as all other screws work fine). Will include the original hardware (new).
More pictures here:
I'm downsizing my collection and have become pickier with knives. For trades I am ONLY interested in LNIB Hinderer XM-18 3.5" titanium hardware (blue or bronze) and smooth titanium or cf scales, LNIB ZT 0562TI (with or without blue or bronze titanium hardware), and lightly used or better 8" DMT DiaSharp stones.
Knives are still available unless marked SOLD.
All knives come with the original factory box, literature, etc. Prices are as follows. Please read the rest for detailed descriptions and pictures.
- Hinderer XM-18 3.5" Spanto gen 4: SOLD
- KW exclusive PM2 M4 CF: SOLD
- KW exclusive Military 204p: SOLD
- Spyderco Manix 2 s110v: SOLD
- ZT 0562 Elmax: SOLD
- ZT 0801 with full ti hardware/clip: $130 --> $120.
1. Hinderer XM-18 3.5" Spanto gen 4. 2nd owner. Has been used very sparely in house but never carried or sharpened. Currently on PB washers (factory teflon washers will be included). Medium+ detent. Flips reliably and well. Other than a couple of VERY faint hairline scratches (see the 1st picture on the linked page) there is no other wears, scratches, or dings. The edge is still factory. The working finish ti and stonewashed blade are great color combo imo. The blade is centered with no play in any direction. If you prefer, I can replace the factory sand color scale with an OD green scale or a dark green scale (they are all LNIB).
More pictures at:
===================
6. ZT 0801 purple ano plus full ti hardware. Used and sharpened but no carried. Super smooth, no blade play. Light wear on handle and blade but nothing deep. The full ti hardware (pivot set, lockbar insert screw, LBS screw, body screws, standoffs) and pocket clip cost $100+, though the head of the screw near the lanyard hole on the presentation side is stripped but sits tight in the scale (does not affect disassemble as all other screws work fine). Will include the original hardware (new).
More pictures here:
Last edited: