List of GEC knives and if they have half stops, and lengths

Besides being called "Farmers Jack", #99 is also called "Wall Street".
 
CasePeanut said:
I still refer to this list all the time. Are we able to make updates with the newer models?
Click to expand...

Sure, if you or anyone has updates please post them and I'll add them. I haven't been updating this myself regularly as I've seen dealers post most of this info on their own sites and because I've slowed way down on my purchases until GEC starts offering 2 bladed stainless jacks.

Nature Boy said:
#97 Allegheny Large Coke Bottle
4 11/16 closed
3 13/16 main
Half stop
Click to expand...

hamsco said:
Besides being called "Farmers Jack", #99 is also called "Wall Street".
Click to expand...

Nature Boy said:
Pemberton main blade is:
Clip 2”
Spear 2 1/16
Click to expand...

Thanks for the updates, I added them.
 
Thank you!
2Dead said:
Sure, if you or anyone has updates please post them and I'll add them. I haven't been updating this myself regularly as I've seen dealers post most of this info on their own sites and because I've slowed way down on my purchases until GEC starts offering 2 bladed stainless jacks.







Thanks for the updates, I added them.
Click to expand...
yo
 
I appreciate this thread thank you! I keep this info in my database as well (thanks in large part to this thread). Always surprised how often I refer to the length and half stop info
 
Last edited:
2Dead said:
Sure, if you or anyone has updates please post them and I'll add them. I haven't been updating this myself regularly as I've seen dealers post most of this info on their own sites and because I've slowed way down on my purchases until GEC starts offering 2 bladed stainless jacks.







Thanks for the updates, I added them.
Click to expand...
A minor correction; I think you entered 3 3/16 instead of 3 13/16 for the 97 main blade
 
waverave said:
I appreciate this thread thank you! I keep this info in my database as well (thanks in large part to this thread). Always surprised how often I refer to the length and half stop info
Click to expand...
Darren - is there a public version of your database that we could access?
 
CasePeanut said:
Darren - is there a public version of your database that we could access?
Click to expand...
Not yet...but there will be at some point :thumbsup::thumbsup::thumbsup: There is a lot of info in there but I still have quite a bit to research (shields, for example) for it to be what I was hoping it to be.
I figure when I'm ready I'll make it accessible via Google Sheets but I haven't really thought it all the way through yet and I've been a bit swamped with other things.
Until then, just tag me or send a message and I'd be more than happy to help with whatever queries are out there. I'll definitely post more info to my database thread when the time comes.
 
waverave said:
Not yet...but there will be at some point :thumbsup::thumbsup::thumbsup: There is a lot of info in there but I still have quite a bit to research (shields, for example) for it to be what I was hoping it to be.
I figure when I'm ready I'll make it accessible via Google Sheets but I haven't really thought it all the way through yet and I've been a bit swamped with other things.
Until then, just tag me or send a message and I'd be more than happy to help with whatever queries are out there. I'll definitely post more info to my database thread when the time comes.
Click to expand...
Thank you - Even an early version on google sheets would be great to see. Thanks for the help!
 
#35 Calf Pen, main locking wharncliffe and secondary one-arm slip both have half-stops. Not sure of lengths offhand.
 
I would love to have this list include pictures of each model, and ideally a pic of all the models in a row with something for scale to make it easier to see how big or small they actually are.
 
2Dead said:
Thanks Jamie, updated :)

**Edited previous list to table format including closed and blade lengths. Special thanks to PythonDR and Steve/draggat for help/inspiration for putting this together.
* Model# * Model Names * Closed Length * Blade Length * Half Stops ***
* #06 * Pemberton * 2.750" * 2" clip, 2.0625 spear * Yes ***
* #09 * Esquire * 2.875" * 1.687" * No ***
* #12 * Toothpick, Powderhorn * 4" * 2.875 * No ***
* #13 * Congress Jack * 3.687" * 2.937" * Yes ***
* #14 * Lick Creek, Boy’s Knife * 3.0625" * 2.375" * Yes ***
* #15 * Barlow, Boy's knife, (STR) Electrician, Crownlifter * 3.5" * 2.687" * Yes ***
* #16 * Canoe * 3.5" * 2.5" * No ***
* #21 * Bullbuster * 4.625" * ? * Yes ***
* #22 * Magnum * 2.687" * ? * Yes ***
* #23 * Pioneer (slipjoint and LL) * 4.5" * 3.781" * Yes ***
* #23 * Bull Lock (back lock) * 4.5" * 3.781" * No ***
* #25 * Ez-Open, Jack * 3" * 2.125" * Yes ***
* #26 * Sleeveboard * 3" * ? * No ***
* #28 * French Kate * 3.25" * 2.375" * No ***
* #33 * Conductor (2 blade) * 3.375" * 2.5" * No ***
* #33 * Whittler * 3.375 * 2.5" * Yes on secondary blades but not main blade ***
* #35 * Drover, Harness Jack, Churchill * 3.75" * 2.8675" * No ***
* #36 * Sunfish * 4.250" * 2.937" * No ***
* #38 * Farmers Jack * 3.875" * 2.312" * No ***
* #38 * Grinling Whittler * 3.875" * 2.312" * Yes on secondary blades but not main blade ***
* #42 * Missouri Trapper * 4.25" * 3.375" * Yes ***
* #42 * Missouri Trader (lockback) * 4.25" * 3.375" * No ***
* #44 * Buffalo Jack * 3.5" * 2.875" * Yes ***
* #45 * Lumberjack * 4.375" * 3.187" * Yes ***
* #46 * Whaler * 4.375" * 3.062" * No ***
* #47 * Hayin Helper, Viper * 3.875" * 3.062" * Yes ***
* #48 * Trapper, Single Bladed Trapper, Western Trapper, Jack, Improved Trapper, Woodcock * 3.875 " * 3.125" * Yes ***
* #53 * Cuban Stockman, Muskrat, Furtaker Trapper * 4.125" * 2.937" * No ***
* #54 * Harness Jack, Cigar Whittler, Big Jack * 4.250" * 3" * Yes ***
* #55 * Hound's Tooth * 3.5" * 2.625" * Yes ***
* #56 * Dogleg Jack, Weaver Jack * 3.5" * 2.562" * No ***
* #57 * Half Whittler * 3.5" * 2.375" * No ***
* #57 * Geppetto Whittler * 3.5" * 2.375" * Yes on secondary blades but not main blade ***
* #57 * Wrangler * 3.5" * 2.375" * ? ***
* #61 * Congress, Half Congress * 3.750" * 2.125" * Yes ***
* #62 * Easy Pocket Congress * 3.750" * 2.375 * Yes ***
* #62 * Courthouse Whittler * 3.750" * 2.375 * Yes on secondary blades but not main blade ***
* #63 * Mako * 4.5" * 3.5" * Yes ***
* #64 * Babylon Special (lockbacks) * 4.375" * 3.5" * No ***
* #65 * Ben Hogan (slip joint) * 4.5" * 3.5" * Yes ***
* #65 * Ben Hogan (lock back) * 4.5" * 3.5" * No ***
* #66 * Serpentine Jack, Calf Roper, Moose, Calf Roper Slim * 3.5" * 2.5" * No ***
* #68 * Pony Jack, White Owl, Buckaroo * 3.5" * 2.5" * No ***
* #71 * Bullnose * 3.875" * 3.062" * Yes ***
* #72 * Cody Jack (slipjoint) * 3.875" * 3.062" * Yes ***
* #72 * Lockback * 3.875" * 3.062" * No ***
* #73 * Scout, Jack, Farmer * 3.75" * 3.125" * Yes ***
* #74 * Saddle Trapper/Wharncliffe Trapper * 3.875" * 3" * Yes ***
* #74 * Cotton Sampler * 3.875" * 3"? * Yes ***
* #76 * Outlaw Jack, Western Outlaw * 3.5" * 2.687" * Yes ***
* #77 * Bladeforums knife, Medium Barlow, Washington Jack, Yankee Jack * 3.625" * 2.875" * Yes ***
* #78 * American Jack * 3.750" * 2.812" * Yes ***
* #79 * Workhorse (3 blade) * 3.750" * 2.625" * Yes ***
* #79 * Workhorse (2 blade) * 3.750" * 2.625" * No ***
* #81 * Coon Skinner, Abilene * 4" * 3.125" * No ***
* #82 * Dixie Stock Knife * 4.125" * 2.968" * No ***
* #85 * Bullet End Jack * 3.687" * 2.687" * Yes ***
* #89 * Gambler (versions with single solid back spring, seems to be the 1095 versions) * 4" * 3.125" * No ***
* #89 * Executive Whittler, Gambler (versions with 2 thin back springs, seems to be the 2012 440C versions, see post #52) * 4" * 3.125" * Yes on secondary blades but not main blade ***
* #92 * Eureka Jack, Talon * 3.625" * 2.875" * Yes ***
* #97 * Allegheny Large Coke Bottle * 4.6875 * 3.1825" * Yes ***
* #99 * Farmer Lock (lockback), Wall Street * 3.750" * 3.125" * No ***

(removed original table because formatting broke)
Click to expand...
I wanted to thank you for this thread!
For consistency...might consider adding the #18 Coyote/Beagle @ 2.75", the #43 Oregon Trapper @ 4.25", the #83 Tascosa LB @ 3.375" and the #98 Texas line @ 4.875" :thumbsup::thumbsup::thumbsup:
 
Nature Boy said:
A minor correction; I think you entered 3 3/16 instead of 3 13/16 for the 97 main blade
Click to expand...
Yep, transposed the 2 numbers. Fixed now.

nyarlotep said:
#35 Calf Pen, main locking wharncliffe and secondary one-arm slip both have half-stops. Not sure of lengths offhand.
Click to expand...

waverave said:
I wanted to thank you for this thread!
For consistency...might consider adding the #18 Coyote/Beagle @ 2.75", the #43 Oregon Trapper @ 4.25", the #83 Tascosa LB @ 3.375" and the #98 Texas line @ 4.875" :thumbsup::thumbsup::thumbsup:
Click to expand...

Thanks for the updates, I added them to the posts.
 
What a great thread!! You have inspired me to put together a list I have been working on, but in my case it is going to be about different aspects. Thanks very much
 
You must log in or register to reply here.
Back
Top