RollingStoned
Platinum Member
- Joined
- Jan 17, 2021
- Messages
- 286
Hate to let these go, but have other knives to pay for, so here is what is on the table...
From Left to right in the group photo:
Knife #1:
Microtech Combat Troodon ~ Tanto Edge ~ Tactical Black Cerakoted Blade ~ Full Serrated ~ Blue Anodized Handles ~ CTS-204P Steel ~ Tactical Black Hardware ~ Build Date 8/2014 ~144-3-BL ~ 30343 ~ With Original Box & Pamphlet ~SOLD!
I purchased this knife Brand New, from I believe E-Knives. While in perfect condition functionally, there is a small (half the size of a postage stamp) area on the clip side where it appears they might have had a price tag sticker affixed to the handle and the glue might have slightly tinted the anodization, again, it is very hard to notice, I just wish to be extremely detailed in my descriptions so there are absolutely no potentially unpleasant surprises. While almost unnoticeable, the anodized finish appears slightly 'imperfect' (for a lack of a better word) in this small spot near the opening. Even though it is very difficult to see, I am OCD and did notice it upon very close inspection and in the proper lighting. I attempted to photograph this and being such a faint difference, the difference did not show in the photos. I will update this listing later with a close up photograph.
After a most friendly telephone call to Microtech, they offered to replace the handle if I wanted to send it to Microtech for a spa treatment, however, being relatively unnoticeable, I never got around to sending her in.
Appearantly, this color and blade configuration was produced in relatively limited numbers and is sold out everywhere. I have not personally seen any others offered for sale since I purchased her. The action is firm but supple enough to not require a thumb massage after using.
Knife #2:
Flat Body Old School Ultratech ~ Stonewashed Bayonet Edge ~ Elmax Blade ~ Matte Black Aluminum Handles ~ Build Date 5/2015 ~ Old style Tri-Domed Alien Eyes Screws (domed, not flat - there were two different styles of these screws, flat and domed) ~ 120-10 ~ Serial Number: 44580 ~ With Original Box & Pamphlet ~ Was $400 ~ Now $350
Offered here is a splendid specimen of an old school flat bodied Microtech Ultratech, in basically brand new perfect condition, I can not find a blemish or embellishment anywhere. Featuring the old style stepped trigger/switch, tri eye-domed screws, old school skull/glass crusher and low key clip without Date and serial number, which are on the handle instead. The Stonewashed blade complements the black Handles exquisitely and is in perfect unused condition. The included original box and pamphlet is in perfect condition and still has the BHQ inventory sticker on the back side of the box.
Knife #3:
Original USER 2015 Ultratech Single Edge ~ Tri-Grip ~ Tactical Standard ~ Black Handles ~ 121-1 T ~ Build Date 5/2015 ~ Serial Number: 55861 ~ NO BOX or Pamphlet ~ WAS $400 ~ SOLD!
This knife appears to have a DLC coated blade and hardware, although, it could be cerakoted, it sure looks more shiny, like the usual DLC coating that Microtech uses. This is from the earlier run of Tri-Grips in 2015 that had the Tri-Grip pattern completely covering the back side. The 'newer' versions from 2016 featured a flat space under where the bottom of the carrying clip rests against the handle. There is noticeable wear on the edges of the clip, the crusher and a few minor wear spots on the handle. The blade has a few minor scratches on the front, but appears in otherwise great condition with no scratches on the back whatsoever.
While this knife does not have it's original box, I can include a Microtech box for an additional $25 if desired. Also, I have an identical knife with its box, so I could scan and email you the label if desired.
Microtech Star Wars Edition Knives
Knife #4:
BNIB ~ Brand New In Box
Ultratech Double Edge Tri-Grip Sith Lord Red Standard ~ 122-1-SL ~ Build Date 7/2021 ~ Serial Number: 5075 ~ WAS $450 ~ NOW $400
Not much needed to be said about this one, sold out everywhere. An awesome full body Tri-Grip Ultratech with Red Cerakoted Blade and two tone ringed screws and skull crusher as well as a two tone x-wing trigger/switch. This is from the recent 2021 edition. This has never been used, carried or sharpened and has only been fired a few times, no fidgeting.
Knife #5:
BNIB - Brand New in Box
Ultratech ~ Double Edge ~ Jedi Knight ~ Blue Standard ~ 122-1 JK ~ Build Date 04/2021 ~ Serial Number 5112 ~ WAS $450 ~ NOW $400
As with the Sith Lord, this Jedi Knight Tri-Grip Ultratech features a colored blade, this one being Blue for Jedi Knights.this is also from the more recent 2021 run, not the original run. I purchased this BRAND NEW from a well known authorized dealer and as with the Sith and Stormtrooper, sold out everywhere. This has never been used, carried or sharpened and has not been fidget with and only fired a handful of times.
Knife #6:
Microtech/Frankentech Ultratech Bounty Hunter
Ultratech ~ Tanto Edge ~ Bounty Hunter - Apocalyptic Standard ~ 123-10 BH ~ With Original Box ~SOLD!
This Ultratech Bounty Hunter was sold as New In Box when I obtained her. Utilizing a Microtech Tool Kit (identical to the one offered here), I swapped the Red screws, switch and skull crusher with two tone ringed hardware from an also New In Box Sith Lord Ultratech making this a Bounty Lord! While the standard red hardware definitely is a striking look, this combination is a bit more subdued for a more tactical oriented mission. The action on this baby is as smooth as butter... Bounty Hunter Ultratechs have been fetching upwards of $600 lately, making this a realitive bargain at my asking price.
Knives #7 & 8:
Given the scarcity and popular demand for knife #7, I prefer to sell these two as a pair. I would be open to selling these separately, however, prefer to sell as a set. PRICE FOR BOTH KNIVES AS A SET: WAS $1,000 ~ SOLD!
Ultratech Single Edge Stormtrooper Brand New In Box
Ultratech ~ Single Edge ~ Stormtrooper ~ White Standard ~ 121-1 ST ~ Build Date: 5/2016 ~ Serial Number: 1099
This knife is I'm PERFECT UNUSED condition, no damage, scratches or embellishments whatsoever. I have had a few of these and this one one is slightly less bright white than some of the others I have had, possibly due to either a thinner coating of cerakote or possibly less pigment (possibly Titanium Dioxide) in the mixture. In my opinion, it gives the knife a very appealing metallic white look as opposed to the more enamel looking white on the exocet I am offering up as well. While The skull crusher is two toned and ringed in silver lines and the switch features a two tone silver X, the screws are solid black.
Exocet ~ Double Edge ~ Stormtrooper ~ White ~ White Standard ~ 157-1 ST ~ Build Date 5/2021 ~ Serial Number 457
I purchased this BRAND NEW from PVK when they were first introduced, I believe I paid $375, which was their original asking price. They have since come down a bit in price. It has only been out for photos and has never been carried, used, sharpened or in any other way embellished whatsoever and has only been fired a few times, it is in perfect brand new condition. Like the Ultratech, thus knife features a two-toned x-wing trigger/switch as well as ringed, two tone screws on both the handle and the pocket clip/crusher/lanyard holder.
Item #9:
Microtech Tool Kit
Satin Stainless Steel
98-4-MK ~ WAS $300 ~ NOW $250
NEW IN BOX, Inner pouch still sealed, never opened, never touched, never used, just like a set of mint coins...
While you can find these occasionally, these are also usually sold out everywhere. I also have a bead blasted version, but the Satin version seems to be a bit more prevalent and is the one up for grabs. These are tooled MUCH more precisely than the aftermarket ones offered on eBay or elsewhere. A Microtech claw logo is featured on the top of the cap on the handle (I used a separate 'user' tool for the photo).
According to the included 'paperwork', this tool works with the following hardware:
•Combat Troodon, Dirac Delta Glass Breaker
• Early UT screw
• Current UTX-70 screw
• Dirac Screw
• Troodon, UT, UTX-85, Combat Troodon, Dirac Delta Screw
• LUDT, Sigil Pivot Screw
• UT Glass Breaker
• Early UTX-70 Screw
From Left to right in the group photo:
Knife #1:
Microtech Combat Troodon ~ Tanto Edge ~ Tactical Black Cerakoted Blade ~ Full Serrated ~ Blue Anodized Handles ~ CTS-204P Steel ~ Tactical Black Hardware ~ Build Date 8/2014 ~144-3-BL ~ 30343 ~ With Original Box & Pamphlet ~
I purchased this knife Brand New, from I believe E-Knives. While in perfect condition functionally, there is a small (half the size of a postage stamp) area on the clip side where it appears they might have had a price tag sticker affixed to the handle and the glue might have slightly tinted the anodization, again, it is very hard to notice, I just wish to be extremely detailed in my descriptions so there are absolutely no potentially unpleasant surprises. While almost unnoticeable, the anodized finish appears slightly 'imperfect' (for a lack of a better word) in this small spot near the opening. Even though it is very difficult to see, I am OCD and did notice it upon very close inspection and in the proper lighting. I attempted to photograph this and being such a faint difference, the difference did not show in the photos. I will update this listing later with a close up photograph.
After a most friendly telephone call to Microtech, they offered to replace the handle if I wanted to send it to Microtech for a spa treatment, however, being relatively unnoticeable, I never got around to sending her in.
Appearantly, this color and blade configuration was produced in relatively limited numbers and is sold out everywhere. I have not personally seen any others offered for sale since I purchased her. The action is firm but supple enough to not require a thumb massage after using.
Knife #2:
Flat Body Old School Ultratech ~ Stonewashed Bayonet Edge ~ Elmax Blade ~ Matte Black Aluminum Handles ~ Build Date 5/2015 ~ Old style Tri-Domed Alien Eyes Screws (domed, not flat - there were two different styles of these screws, flat and domed) ~ 120-10 ~ Serial Number: 44580 ~ With Original Box & Pamphlet ~ Was $
Offered here is a splendid specimen of an old school flat bodied Microtech Ultratech, in basically brand new perfect condition, I can not find a blemish or embellishment anywhere. Featuring the old style stepped trigger/switch, tri eye-domed screws, old school skull/glass crusher and low key clip without Date and serial number, which are on the handle instead. The Stonewashed blade complements the black Handles exquisitely and is in perfect unused condition. The included original box and pamphlet is in perfect condition and still has the BHQ inventory sticker on the back side of the box.
Knife #3:
Original USER 2015 Ultratech Single Edge ~ Tri-Grip ~ Tactical Standard ~ Black Handles ~ 121-1 T ~ Build Date 5/2015 ~ Serial Number: 55861 ~ NO BOX or Pamphlet ~ WAS $
This knife appears to have a DLC coated blade and hardware, although, it could be cerakoted, it sure looks more shiny, like the usual DLC coating that Microtech uses. This is from the earlier run of Tri-Grips in 2015 that had the Tri-Grip pattern completely covering the back side. The 'newer' versions from 2016 featured a flat space under where the bottom of the carrying clip rests against the handle. There is noticeable wear on the edges of the clip, the crusher and a few minor wear spots on the handle. The blade has a few minor scratches on the front, but appears in otherwise great condition with no scratches on the back whatsoever.
While this knife does not have it's original box, I can include a Microtech box for an additional $25 if desired. Also, I have an identical knife with its box, so I could scan and email you the label if desired.
Microtech Star Wars Edition Knives
Knife #4:
BNIB ~ Brand New In Box
Ultratech Double Edge Tri-Grip Sith Lord Red Standard ~ 122-1-SL ~ Build Date 7/2021 ~ Serial Number: 5075 ~ WAS $
Not much needed to be said about this one, sold out everywhere. An awesome full body Tri-Grip Ultratech with Red Cerakoted Blade and two tone ringed screws and skull crusher as well as a two tone x-wing trigger/switch. This is from the recent 2021 edition. This has never been used, carried or sharpened and has only been fired a few times, no fidgeting.
Knife #5:
BNIB - Brand New in Box
Ultratech ~ Double Edge ~ Jedi Knight ~ Blue Standard ~ 122-1 JK ~ Build Date 04/2021 ~ Serial Number 5112 ~ WAS $
As with the Sith Lord, this Jedi Knight Tri-Grip Ultratech features a colored blade, this one being Blue for Jedi Knights.this is also from the more recent 2021 run, not the original run. I purchased this BRAND NEW from a well known authorized dealer and as with the Sith and Stormtrooper, sold out everywhere. This has never been used, carried or sharpened and has not been fidget with and only fired a handful of times.
Knife #6:
Microtech/Frankentech Ultratech Bounty Hunter
Ultratech ~ Tanto Edge ~ Bounty Hunter - Apocalyptic Standard ~ 123-10 BH ~ With Original Box ~
This Ultratech Bounty Hunter was sold as New In Box when I obtained her. Utilizing a Microtech Tool Kit (identical to the one offered here), I swapped the Red screws, switch and skull crusher with two tone ringed hardware from an also New In Box Sith Lord Ultratech making this a Bounty Lord! While the standard red hardware definitely is a striking look, this combination is a bit more subdued for a more tactical oriented mission. The action on this baby is as smooth as butter... Bounty Hunter Ultratechs have been fetching upwards of $600 lately, making this a realitive bargain at my asking price.
Knives #7 & 8:
Given the scarcity and popular demand for knife #7, I prefer to sell these two as a pair. I would be open to selling these separately, however, prefer to sell as a set. PRICE FOR BOTH KNIVES AS A SET: WAS $
Ultratech Single Edge Stormtrooper Brand New In Box
Ultratech ~ Single Edge ~ Stormtrooper ~ White Standard ~ 121-1 ST ~ Build Date: 5/2016 ~ Serial Number: 1099
This knife is I'm PERFECT UNUSED condition, no damage, scratches or embellishments whatsoever. I have had a few of these and this one one is slightly less bright white than some of the others I have had, possibly due to either a thinner coating of cerakote or possibly less pigment (possibly Titanium Dioxide) in the mixture. In my opinion, it gives the knife a very appealing metallic white look as opposed to the more enamel looking white on the exocet I am offering up as well. While The skull crusher is two toned and ringed in silver lines and the switch features a two tone silver X, the screws are solid black.
Exocet ~ Double Edge ~ Stormtrooper ~ White ~ White Standard ~ 157-1 ST ~ Build Date 5/2021 ~ Serial Number 457
I purchased this BRAND NEW from PVK when they were first introduced, I believe I paid $375, which was their original asking price. They have since come down a bit in price. It has only been out for photos and has never been carried, used, sharpened or in any other way embellished whatsoever and has only been fired a few times, it is in perfect brand new condition. Like the Ultratech, thus knife features a two-toned x-wing trigger/switch as well as ringed, two tone screws on both the handle and the pocket clip/crusher/lanyard holder.
Item #9:
Microtech Tool Kit
Satin Stainless Steel
98-4-MK ~ WAS $
NEW IN BOX, Inner pouch still sealed, never opened, never touched, never used, just like a set of mint coins...
While you can find these occasionally, these are also usually sold out everywhere. I also have a bead blasted version, but the Satin version seems to be a bit more prevalent and is the one up for grabs. These are tooled MUCH more precisely than the aftermarket ones offered on eBay or elsewhere. A Microtech claw logo is featured on the top of the cap on the handle (I used a separate 'user' tool for the photo).
According to the included 'paperwork', this tool works with the following hardware:
•Combat Troodon, Dirac Delta Glass Breaker
• Early UT screw
• Current UTX-70 screw
• Dirac Screw
• Troodon, UT, UTX-85, Combat Troodon, Dirac Delta Screw
• LUDT, Sigil Pivot Screw
• UT Glass Breaker
• Early UTX-70 Screw
Attachments
Last edited:
