afishhunter
Gold Member
- Joined
- Oct 21, 2014
- Messages
- 13,167
TWO leather Tubes approximately 15 inches long, 1.8 to 2 inch ID, open both ends, one grometed mounting hole near top for 4mm mounting bolt.
USE: Carry a folding reach extender on a couple Rollator walkers.
ONE: Leather Tube, approximately 15 inches long, 2 inch ID, plugged on one end.
Single grometed hole for 4 mm mounting bolt near the top.
USE: Carry a cane on a Rollator walker.
Since the seat and/or tote/shopping bags on the rollators are black, I'd like the tubes dyed black to match.
I don't need any tooling.
I defer to you what weight and type of leather to use. As long as the mouth stays open, I'll be happy.
Black Ballistic Nylon may be an acceptable alternative material.
Whichever is easiest for you to work with.
If you're interested in doing this project, add at gmail dot com to my user name for my email address.
Thank you in advance.
Steve
USE: Carry a folding reach extender on a couple Rollator walkers.
ONE: Leather Tube, approximately 15 inches long, 2 inch ID, plugged on one end.
Single grometed hole for 4 mm mounting bolt near the top.
USE: Carry a cane on a Rollator walker.
Since the seat and/or tote/shopping bags on the rollators are black, I'd like the tubes dyed black to match.
I don't need any tooling.
I defer to you what weight and type of leather to use. As long as the mouth stays open, I'll be happy.
Black Ballistic Nylon may be an acceptable alternative material.
Whichever is easiest for you to work with.
If you're interested in doing this project, add at gmail dot com to my user name for my email address.
Thank you in advance.
Steve