Pic and Discussion - Have you modified your knife? What did you do?

[Kizer Cutlery]

Another week with another thread! Share your pic of your modified knives and How or why you did it! *Pic is Kizer feist modified by @future.relic from Instagram

 

[comis]

I made some SAK mods in the past, here are some pictures. This particular model I call it Mountain Yeoman:

 

[Therom]

Basic functional tricks only, adding a sharpening choil, smoothen some jimpings, enlarge the access to the lock bar of line locks...

actually my GB2 got all of them

 

[jdmvette]

mine only modding trip was down the road of the most basic of mods...the scale!

my NF, SP, WF XM-18 went from this orange G10 scale (not my pic)

to a gray G10

to a battle black titanium

and finally ended where so many eventually end up...micarta!

 

[Kizer Cutlery]

I made some SAK mods in the past, here are some pictures. This particular model I call it Mountain Yeoman:

Wow!nice!it's so cool in the dark! we wanna do something like this to our jade G10 knives as well XD.

 

[Kizer Cutlery]

mine only modding trip was down the road of the most basic of mods...the scale!

my NF, SP, WF XM-18 went from this orange G10 scale (not my pic)

to a gray G10

to a battle black titanium

and finally ended where so many eventually end up...micarta!

haha, micarta is so great!

 

[bflying]

In terms of Kizer, only anodizing.

 

[Kizer Cutlery]

In terms of Kizer, only anodizing.

haha, nice colour!

 

[bflying]

haha, nice colour!

Thank You.

 

[Sharp & Fiery]

Kizer Cutlery

Is there a reason that you post a new thread every week in “General knife discussion?”
You have your own subform...as a company rep, you should be posting in your subform not in General.
Also, if I remember correctly, there are a few “modding” threads already started.

 

[WValtakis]

Also, if I remember correctly, there are a few “modding” threads already started.

Yup, your memory is fine

https://www.bladeforums.com/threads/knife-mods-did-it-yourself-show-off-your-work.1529522/

https://www.bladeforums.com/threads/lets-see-your-cold-steel-mods.1206032/

https://www.bladeforums.com/threads/the-“can’t-leave-anything-alone”-thread.1660973/

 

[vjb.knife]

This older Cold Steel Master Tanto has always been kind of a favorite knife. I always liked the thumb grooves of the Outdoorsman, so I added some to this tanto.
Also the sharpening on this one has been modified quite a bit to try to replicate the edge on a Rockstead Knife, Appleseed style. Many hours of variable angle sharpenings and stropping on leather have gotten it pretty close and extremely sharp.

 

[Kizer Cutlery]

Kizer Cutlery

Is there a reason that you post a new thread every week in “General knife discussion?”
You have your own subform...as a company rep, you should be posting in your subform not in General.
Also, if I remember correctly, there are a few “modding” threads already started.

The main reason is that we wanna have some knives discussion with you guys, make some connection with this community. For our own subform, we should leave it to the product or business threads. Well, about modding threads, I think they might be similar but not the same. In this case, we are not only asking pic but also discussing how or why you did it, so others can know the way to do that kind of modding or giving some advice to improve someones modding method. Hope you enjoy it, best wishes.

 

[Kizer Cutlery]

Yup, your memory is fine

https://www.bladeforums.com/threads/knife-mods-did-it-yourself-show-off-your-work.1529522/

https://www.bladeforums.com/threads/lets-see-your-cold-steel-mods.1206032/

https://www.bladeforums.com/threads/the-“can’t-leave-anything-alone”-thread.1660973/

About modding threads, I think they might be similar but not the same. In this case, we are not only asking pic but also discussing how or why you did it, so others can know the way to do that kind of modding or giving some advice to improve someones modding method. Hope you enjoy it, best wishes.

 

[Sharp & Fiery]

The main reason is that we wanna have some knives discussion with you guys, make some connection with this community. For our own subform, we should leave it to the product or business threads. Well, about modding threads, I think they might be similar but not the same. In this case, we are not only asking pic but also discussing how or why you did it, so others can know the way to do that kind of modding or giving some advice to improve someones modding method. Hope you enjoy it, best wishes.

There is a whole subform on “tinkering and embellishment.”
We dont see the other companies posting in the General Knife Discussions, they post in their subform.
It just seems like you are shilling for attention. I disagree with it, but im just some smuck who collects/uses knives so what do I know.

 

[Grandmaster]

I have modded my Holt v4, it was purple, so I thought it was gonna grow on me, but it didnt, so I had it all blacked out, and it looks amazing, also modded my other two V3’s, with skiff bearings, man, what a difference do those make, ordered some for my Arius now,

 

[rpttrsn]

Kershaw leek: File work and new deep carry clip.

ZT 0559 New scales and my Marine corp lapel pin.

ZT 0566 Blade mod

 

[Marcel Kúdela]

Hi, I've built a completely new handle for my Cold Steel Talwar XL

 

[Kizer Cutlery]

Hi, I've built a completely new handle for my Cold Steel Talwar XL

Nice mod! I finally can see it! what wood did you use? what kind of coin is that inlay the handle? looks great!

 

[Lee D]

Kizer Cutlery

Is there a reason that you post a new thread every week in “General knife discussion?”
You have your own subform...as a company rep, you should be posting in your subform not in General.
Also, if I remember correctly, there are a few “modding” threads already started.

I much prefer Kizer’s threads to more of the Ganzo “discussions”