Request for comparison pics of RC-3 and RC-4

[squirrel]

Would it be possible to get a spine shot pic of the RC-3 and RC-4 side by side for comparison of thickness and length? Thanks!

 

[Cpl Punishment]

Well, here's one of width and length.

From the RAT cutlery site, the RC-3 ia .125" (1/8") thick, the RC-4 and RC-6 are .187" (3/16) thick. Not a whole lot of difference unless you want to pound it through things.

 

[madfast]

hard to tell from the pics. do the RC-3 and RC-4 have the same blade width (edge to spine)???

 

[Fletcher Knives]

It looks to me that the RC-4 has about 1/8 to 1/4 inch wider blade edge to spine. Closer to 1/8"

 

[Cpl Punishment]

.............................................................RC-3.............RC-4.............RC-6

Overall length:.........................................8 5/16"..........9.0"..............11.75"
Cutting Edge length:.................................3 3/8"...........4.06"..............5.75"
Blade Length (end of handle to tip of knife): 3 7/8"...........4.5"................6.5"
Blade Width:.............................................N/A............1.25"..............1.56"
Maximum thickness:..................................1/8"...........,.188"..............,.188"
Weight: in ounces (knife only).....................5.2
ounces (knife and sheath)..........................9.3

Unfortunately, blade width isn't given for the RC-3, but looking at the others, it's probably 1"-1.125"

 

[R.A.T.]

From the top of the thumb grippers on the spine to the edge runs about 1.240" on both the RC-3 and RC-4.

 

[squirrel]

Thanks guys I still can't wait to get one

 

[madfast]

Thanks, the RC-4 is seriously one awesome knife. the size is exactly what i had hoped for in a FB.