REVIEW: Cold Steel Frontier Tomahawk.

Joined
Jul 2, 1999
Messages
1,347
About a month ago, I suddenly came down with a bad case of 'Hawk fever. My extensive search led me to the Cold Steel Frontier 'Hawk. This past Saturday was the first opportunity that I have had to use the hawk. Before using it, I spent about 20 minutes on a diamond stone getting the edge in a condition that I liked. When it came, the bevels were even, and the finish was good. The only problem; it was about as sharp as a bag of rabbits! So, after achieving a descent edge, off we went. First, a friend and I were going to do some ATV riding. My quad has been down and out for about 6 years until sat. when it was fixed. The trails were all grown in and there were a lot of downed trees. The ‘hawk was used to chop a lot of branches and even a downed tree that was blocking a path. The tree was about 11” in diameter. The first inch was wet and soft, but after that, it was as if it were petrified. The ‘hawk did a fine job on the tree halving it in about 5 minutes of chopping with medium effort. I checked the edge when we were done, still in the same condition as before we started. After riding around for a while, we decided to see how it throws. This was our first time ever throwing a ‘hawk, so you can imagine the hell we put this thing through. I can’t tell you how many times it hit on the flat of the head, or the side of the handle. There were a couple of times that the noise produced from the ‘hawk slamming into the telephone pole made me say “Oh man, that thing is busted” But after examining it, it was 100% fine. After about 10 minutes of ricochets and misses, we started getting good and found the ‘hawks “Sweet distance”. With this ‘hawk, and our throwing style, we are dead on accurate at 19’. Throw after throw at 19’ and it sticks EVERY time. Within a half hour we were consistently hitting inside a 5” square. Pretty good for a couple of beginners
smile.gif
The Cold Steel Frontier ‘hawk stood up to everything we threw at it,(Or should I say, everything we threw it at?) without a single problem. It is good for utility chores and great for throwing. Combined with it’s low, low price, you can’t go wrong. My friend is going to be purchasing the “Norse ‘Hawk” model, soon. I’ll let you know how it compares. Thanks for taking the time to read this. Take care.

------------------
Louis Buccellato
http://www.themartialway.com
Knives, Weapons and equipment. Best prices anywhere.
-------------

"only the paranoid will survive"

[This message has been edited by TheMartialWay (edited 02-27-2001).]
 
Nice job on the throwing. How does the 'hawk compare to a decent large knife (10" class) in regards to chopping ability? Less, more or similar?

-Cliff
 
Cliff,

I like the resuts of the 'hawk better. It doesnt go in as deep as a large knife does due to the thicker blade, but it does not bind, and knocks out big wedges of wood as opposed to the knife which slices in deeper but binds and takes more strokes to knock out the hunks of wood. This is the experience that I had, anyway. Cliff, Let me know if there is anything specific you would like me to do.

------------------
Louis Buccellato
http://www.themartialway.com
Knives, Weapons and equipment. Best prices anywhere.
-------------

"only the paranoid will survive"
 
Thanks for the details Louis. Do you sell these? If so can you drop me an email with a price including shipping.

-Cliff
 
Back
Top