- Joined
- Feb 21, 2017
- Messages
- 797
Hello guys, this time - a birch bark puukko again. But with a slight modification , so that it can be made out of 3.8 mm(0.15") thick stock instead of 5mm(0.20") . As you can see there are plunge lines and sharpening notch . Also the blade cross section is not rhombic but "regular".
Steel - Elmax 60-61 HRC.
OAL - 246mm (~9.7")
Blade - 121Х24.5Х3.8mm (~4.7x0.96x0.15") flat grind
Blade - finish - p800
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics
Steel - Elmax 60-61 HRC.
OAL - 246mm (~9.7")
Blade - 121Х24.5Х3.8mm (~4.7x0.96x0.15") flat grind
Blade - finish - p800
Handle - birch bark and bronze
Leather sheath with wooden inlay
More pics