- Joined
- Aug 26, 2011
- Messages
- 1,007
I'm looking to sell several of my remaining knives to raise some funds for the holidays. Most of these knives are new/unused or like new. All knives will be shipped with tracking/delivery conformation and if you want insurance $1 please add to the shipping cost(not using it is at your own risk) as I'm already doing slightly cheaper flat rates(even for the insurance)
THIS IS A REPOST WITH PRICE DROPS ACROSS THE BOARD!!
Here's the list-
1. BRT Bladeworks(Ben Tendick) 9" blade Chopper(new/never used), 5/32" 5160 steel with 'rough forged' finish with 'horse stall mat' rubber scales(feels great in the hand), kydex sheath with tek-lok. It didn't come very sharp and my attempt to sharpen it was a fail as it was my first chopper and i only had a cheap hand held sharpener but its still decently sharp though. I chose 5/32" thickness to make it lighter and able to use for a longer time...too bad i never got too do so,lol. As you may notice the blade is oiled in the pics as well
Price-$250-Now $200+$8 s/h (conus)
2. SOLD-ESEE 4 brand new, never used with kydex sheath. Its the desert tan w/ micarta version with black kydex sheath.
Price-$77 to your door insured (conus)
3. SOLD-Matt Caldwell 1-5 Brand New/Unused Drop point 5" blade 154cm w/ stonewashed finish and coyote brown micarta scales and tan kydex sheath w/ tek-lok. This knife is perfect in the hand. These were limited to 250 and were made between 2008-2012(I believe).
Price-$210-Now $170+$6 s/h (conus)
4. SOLD-Fiddleback Forge machete like new, 14" blade with od green micarta scales and leather sheath. The blade has a spot or two that came on it(these machetes have little 'imperfections'), its very sharp and was used only once to split a hunk of 2x4. I've kept it oiled as best i could but as a carbon steel thats 7 yrs old it does have some very small rust spots on the spine mainly.
Price-$110+$15 S/h (conus)-
5. SOLD-Becker/Ritter-Bk12/RSk MKII 'Perseverence' w/ OD green micarta scales. Like New, used once to open 2 boxes and lightly sharpened with a super fine sharpener.
Price-$125-NOW $115+$6 s/h (conus)
6. SOLD-Cheap-o bundle: Condor Knife & Tool Hudson Bay camp knife, Condor Bushcraft Basic 5", Condor Varan 8" blade and Linder 10" Machete. None of these have been used but the blades are all marked up from numerous attempts with stones and different handheld sharpeners...yet none actually got any sharper, smh. I think when it comes to the 1075 these are made from, you just gotta use a belt sharpener like the worksharp. So these are used looking and dull but half the time condor knives look like that anyway, lol. If you're unlike me and are actually good at sharpening and want some inexpensive knock around knives then here you go.
Price-$50+$20s/h (shipping is high cuz of the size/weight of most of these).
7. Martin Knives 'Varmint hunter': This was offered as part of Martin Tactical knives' Frontier Series. This ia a 4", 1/8" 1095 convex grind drop point hunter style with the standard walnut scales and leather pouch sheath. HOWEVER, this was first experience with a convex grind (i didn't even know what each grind was at that time) and very early in my collecting so I only owned some cheap stones and a crappy cross rod ceramic sharpener and unlike stated on their site, this knife didn't come shaving sharp and would barely even pass the paper test cut so I bumbled around making a mess attemptin to sharpen it. Later I tried a Schrade sharpening system, some diamond pocket sharpeners and even 600-1000 grit sandpaper...when finally calling Martin to ask why none of this worked they told me I should've just used a strop, lol. So you can see in the pics the scratches on the blade but if you can get it on a grinder and buffer it'll look like new and be a great blade cuz its designed to be a hell of a slicer and great belt knife for a hunter/bushcrafter plus the smaller narrow handle feels very comfortable even in my big hands. Also if you can see thru my cheap phones bad camera resolution you can see the 'MK' logo too. I'm letting this one go cheap since it need some work. Also aside from the sharpening debacle this knife was never used, it arrived a bit dull and I didn't want to use it till I got edge on it, sadly I never did, lol.
Price-$50 shipped to your door insured (ConUS)
THIS IS A REPOST WITH PRICE DROPS ACROSS THE BOARD!!
Here's the list-
1. BRT Bladeworks(Ben Tendick) 9" blade Chopper(new/never used), 5/32" 5160 steel with 'rough forged' finish with 'horse stall mat' rubber scales(feels great in the hand), kydex sheath with tek-lok. It didn't come very sharp and my attempt to sharpen it was a fail as it was my first chopper and i only had a cheap hand held sharpener but its still decently sharp though. I chose 5/32" thickness to make it lighter and able to use for a longer time...too bad i never got too do so,lol. As you may notice the blade is oiled in the pics as well
Price-$250-Now $200+$8 s/h (conus)
2. SOLD-ESEE 4 brand new, never used with kydex sheath. Its the desert tan w/ micarta version with black kydex sheath.
Price-$77 to your door insured (conus)
3. SOLD-Matt Caldwell 1-5 Brand New/Unused Drop point 5" blade 154cm w/ stonewashed finish and coyote brown micarta scales and tan kydex sheath w/ tek-lok. This knife is perfect in the hand. These were limited to 250 and were made between 2008-2012(I believe).
Price-$210-Now $170+$6 s/h (conus)
4. SOLD-Fiddleback Forge machete like new, 14" blade with od green micarta scales and leather sheath. The blade has a spot or two that came on it(these machetes have little 'imperfections'), its very sharp and was used only once to split a hunk of 2x4. I've kept it oiled as best i could but as a carbon steel thats 7 yrs old it does have some very small rust spots on the spine mainly.
Price-$110+$15 S/h (conus)-
5. SOLD-Becker/Ritter-Bk12/RSk MKII 'Perseverence' w/ OD green micarta scales. Like New, used once to open 2 boxes and lightly sharpened with a super fine sharpener.
Price-$125-NOW $115+$6 s/h (conus)
6. SOLD-Cheap-o bundle: Condor Knife & Tool Hudson Bay camp knife, Condor Bushcraft Basic 5", Condor Varan 8" blade and Linder 10" Machete. None of these have been used but the blades are all marked up from numerous attempts with stones and different handheld sharpeners...yet none actually got any sharper, smh. I think when it comes to the 1075 these are made from, you just gotta use a belt sharpener like the worksharp. So these are used looking and dull but half the time condor knives look like that anyway, lol. If you're unlike me and are actually good at sharpening and want some inexpensive knock around knives then here you go.
Price-$50+$20s/h (shipping is high cuz of the size/weight of most of these).
7. Martin Knives 'Varmint hunter': This was offered as part of Martin Tactical knives' Frontier Series. This ia a 4", 1/8" 1095 convex grind drop point hunter style with the standard walnut scales and leather pouch sheath. HOWEVER, this was first experience with a convex grind (i didn't even know what each grind was at that time) and very early in my collecting so I only owned some cheap stones and a crappy cross rod ceramic sharpener and unlike stated on their site, this knife didn't come shaving sharp and would barely even pass the paper test cut so I bumbled around making a mess attemptin to sharpen it. Later I tried a Schrade sharpening system, some diamond pocket sharpeners and even 600-1000 grit sandpaper...when finally calling Martin to ask why none of this worked they told me I should've just used a strop, lol. So you can see in the pics the scratches on the blade but if you can get it on a grinder and buffer it'll look like new and be a great blade cuz its designed to be a hell of a slicer and great belt knife for a hunter/bushcrafter plus the smaller narrow handle feels very comfortable even in my big hands. Also if you can see thru my cheap phones bad camera resolution you can see the 'MK' logo too. I'm letting this one go cheap since it need some work. Also aside from the sharpening debacle this knife was never used, it arrived a bit dull and I didn't want to use it till I got edge on it, sadly I never did, lol.
Price-$50 shipped to your door insured (ConUS)
Attachments
Last edited:
