Several years back I ordered a spear head from the cold steel co. and attached it to a ash pole I had. I did something else to the staff notice
at the bottom there is a wedge looking thing. I cut out a peice of flat
bar with a grinder and shaped it to what I thougt would make nice end
peice. Steel at both ends. If you had to scrape up debrise from the
forest floor or move something ie: snake or what ever out of the way
this will do it. I made a cut in the end of the staff and then drilled holes
and put 2 bolts and some type of a nut that when tighhtened down it digs
into the staff. Well enough talking about heres the pictures enjoy
Take care all,
Bryan
at the bottom there is a wedge looking thing. I cut out a peice of flat
bar with a grinder and shaped it to what I thougt would make nice end
peice. Steel at both ends. If you had to scrape up debrise from the
forest floor or move something ie: snake or what ever out of the way
this will do it. I made a cut in the end of the staff and then drilled holes
and put 2 bolts and some type of a nut that when tighhtened down it digs
into the staff. Well enough talking about heres the pictures enjoy




Take care all,
Bryan