- Joined
- Oct 18, 2001
- Messages
- 20,978
****************************************
LIST IS NOW CLOSED!!!!!!
****************************************
Ok...time to get the ball rolling on this one!!!
Here's the design:
Price will be $195
s/h = $15, $8 additional
International = email me for details
Specs:
Overall length = 16 inches
Blade
Ring is 1 inch diameter and will be chamfered inside/out. :thumbup:
Sign-up List:
Deposit required this time = $75 (or $77 by Paypal)
Payment information here: www.kosterknives.com/payments.htm
(on the list above, PD = Paid Deposit.....PIF = Paid In Full)
Expected delivery time is late-April / early-May !!
Sheath?
I do not have a sheath in mind just yet. I've got a design, but I need to run it by a few people to see feasibility....as I get closer to having it done...I'll be sure to post the details here. Trust me, it'll be cool.
No kydex option on this one - sorry!
IMPORTANT:
1 = You MUST place an order with my Order Tracker here: www.kosterknives.com/orderform.php (registration required) Please include your bladeforums name with your order. Input the following details:
Survivor
A2
As-forged
canvas micarta
air-cooled (heat-treat)
That's it! That's all you have to input. Pretty easy, right?
2 = You MUST provide a first name, last initial with your post below when you sign up.
This will simplify things for me and reduce screw-ups!
Standard price on this one will be around $300 as a custom knife. So, how can I sell it for less? Glad you asked.
If I have to make 'em one-at-a-time:
So, if you want one...get it on it now...and don't be surprised if the price goes up afterwards.
Thanks for looking!!!
Dan
LIST IS NOW CLOSED!!!!!!
****************************************
Ok...time to get the ball rolling on this one!!!
Here's the design:
Price will be $195
s/h = $15, $8 additional
International = email me for details
Specs:
Overall length = 16 inches
Blade
- 9 inches (sharpened), 10 inches to the front of the handle
- A2 steel, hardened to 59 HRc
- 1/4" thick
- 2.25" tall at the belly
- Flats will be "as-forged" finish
- "K" logo will be etched
- 6 inches (from front of the handle to the pommel)
- 5.5 inches of actual handle material
- 1/4" thick material (0.75" total)
- Options would be Natural, Green or Black canvas micarta
- 2 lanyards/tie downs (front safety lanyard = 1/4", rear handle lanyard = 3/8")
- 2 Corby pins (mechanical fasteners)
- Handle is large enough to fit an extra large hand "just right". The rest of us "non-apes" will have some wiggle room - helpful in chopping.
Ring is 1 inch diameter and will be chamfered inside/out. :thumbup:
Sign-up List:
- teacher (Chuck P) - green
- teacher (Chuck P) - black
- KBT (Kevin T)
- KBT (Kevin T)
- Raindrop (Greg S) - natural
- valcas1 (Paul) - natural
- monarh99 (Corrie B) - natural
- t1mpani (Warren H) - natural
- t1mpani - green
- pipeman57 (Aaron R) - green - PD
- rickppoole (Rick P) - green - PD
- Tooth & Nail (John S) - natural - PD
- Tooth & Nail (John S) - green - PD
- RF1 (Randy F) - black - PD
- Blackwind (Johhny H) - green - PD
- timeless design (Mark Z) - natural - PD
- jlkitch (Jim K) - natural
- Can-Am Joel (Joel P) - natural
- din (James F) - green - PD
- din (James F) - green
- ColdOne (Chris W) - natural - PD
- Kelly Glanzer - green - PD
- VoxHog (Bill P) - green - PD
- rctk1 (Reg C) - PD
- lmalterna (Bill M) - natural
- lmalterna - green
- Jeepnut22 (Philip A) - natural - PD
- wyrm (Dale T) - green - PD
- halfserrated (Andrew H) - green
- Kent K - natural - PIF
- Chiller2 (Ben C) - natural
- Andrew Colglazier - natural
- CWL (Charles L) - natural
- Briggz (Bill R) - green - PD
- jgkelly (Jim K) - green - PD
- jgkelly (Jim K) - black - PD
- Old Physics (Jamie V) - green - PD
- wayne37 (Wayne M) - natural
- syrinx (Mike B) - natural
- Chinpo (Adam S) - natural - PD
- woodsyone (Leyli W) - natural - PIF
- TIR (Tom R) - PD
- Rebelder (Rick N) - green - PD
- Tballetta (Tom B) - natural - PD
- ksjumpmd (Kirk S) - green - PD
- ksjumpmd (Kirk S) - natural - PD
- ksjumpmd (Kirk S) - black - PD
- Progunner (John P) - natural - PD
- dinokay (Dino K) - green
- dinokay (Dino K) - natural
- 396vette (David C) - green
- Random04 (Steve R) - black
- SFer77 (Bruce R) - natural
- Jim Hall - natural
- Paddling_man - green
- sandgrouper (Andrew U) - natural - PD
- automaticman (Phil L) - black
- ceiw - natural - PD
- ceiw - green - PD
- texastonydobbs (Tony D) - green
- Gravelface (Jason A) - black
- 007 Agent Zero - green
- madborderman07 - green
- ArchAngel (Rick S) - green
- simmons777 (Ron S) - natural
- Mark M
- Scott D
- Thomas J
- Donald Y
- Miguel L
- Jeff T
- Mark T
- KBT
- hutch762mg (Daniel G) - natural
- resinguy (Guy S) - natural
- mapper66 (Tim R) - green
- cool_hand_luke (Andy K)
Deposit required this time = $75 (or $77 by Paypal)
Payment information here: www.kosterknives.com/payments.htm
(on the list above, PD = Paid Deposit.....PIF = Paid In Full)
Expected delivery time is late-April / early-May !!
Sheath?
I do not have a sheath in mind just yet. I've got a design, but I need to run it by a few people to see feasibility....as I get closer to having it done...I'll be sure to post the details here. Trust me, it'll be cool.
No kydex option on this one - sorry!
IMPORTANT:
1 = You MUST place an order with my Order Tracker here: www.kosterknives.com/orderform.php (registration required) Please include your bladeforums name with your order. Input the following details:
Survivor
A2
As-forged
canvas micarta
air-cooled (heat-treat)
That's it! That's all you have to input. Pretty easy, right?
2 = You MUST provide a first name, last initial with your post below when you sign up.
This will simplify things for me and reduce screw-ups!
Standard price on this one will be around $300 as a custom knife. So, how can I sell it for less? Glad you asked.
If I have to make 'em one-at-a-time:
- heat-treat cost will be $55 instead of $6 (shipping to-n-fro to Paul Bos, plus I don't meet the minimum - only one blade)
- Waterjet cutting is ~$10 per blade versus $50 of labor.
- Blade grinding (out of house) will be $20 per blade instead of $40 worth of labor.
So, if you want one...get it on it now...and don't be surprised if the price goes up afterwards.
Thanks for looking!!!
Dan