-
The rules for The Exchange can be found here. Please read and follow them. Stop using Paypal Friends & Family and follow our best practices to prevent getting ripped off or having a bad deal.
----------
- Thread starter Lorien
- Start date
- Joined
- May 3, 2006
- Messages
- 2,401
Hello!
That's a very interesting piece of steel you have there! I have four questions:
- Thickness? looks like ~3/16 from the pictures...
- Any idea of the hardness?
- Through/differential hardened?
- Is there any holes under the epoxy to attach a handle?
Thanks! :thumbup:
That's a very interesting piece of steel you have there! I have four questions:
- Thickness? looks like ~3/16 from the pictures...
- Any idea of the hardness?
- Through/differential hardened?
- Is there any holes under the epoxy to attach a handle?
Thanks! :thumbup:
- Joined
- Dec 5, 2005
- Messages
- 26,546
oops, sorry I missed your post
.
-it's around 4mm thick
-it's differentially hardened, and my guess would be around 58/59 at the edge
-the handle is epoxied, so I don't know about holes, although since it's diff hardened, the handle may yet be soft enough to drill holes
It is a forged knife, thought I should mention that.
.-it's around 4mm thick
-it's differentially hardened, and my guess would be around 58/59 at the edge
-the handle is epoxied, so I don't know about holes, although since it's diff hardened, the handle may yet be soft enough to drill holes
It is a forged knife, thought I should mention that.