Prices are Paypal F&F shipped in EU and USA. If you prefer Paypal G&S shoot me a message.
For trades, i would consider: TOPS Longhorn Bowie / ZT0392 / ZT0462BLK / ZT0808 / ZT0808BLK ...maybe some other limited run of ZTs, fixed blades from Swamprat
1. Zero Tolerance 0762 (ZT0762) --> €310 F&F (Trade value €350)
Has been handled a couple of times but has not been used in any way. Full box
2. Zero Tolerance 0460 ti (ZT0460ti)--> €210 F&F (Trade value €240)
Has been handled a couple of times but has not been used in any way. Full box
3. Zero Tolerance 0450 Magnacut & Blue CF (ZT0460BLU)--> €220 F&F (Trade value €240)
First owner. Carried This for 2 or 3 days max at work. It has been used to cut paracord (and also burned paracord which is hard). I don't see any issues with the edge. The only fault i can spot are maybe 3 very small and light scratches on the clip but you really have to see it from up close to spot them. Detent is just a bit strong but flies open, lockup is early.
https://imgur.com/a/6KUQYtC
4. Spyderco Delica thin blue line C11FBKBL --> €87 F&F (Trade value €90)
I am the first owner, carried it at work for 4 hours just to get the feeling of it, and I have cut paper just to see how sharp it is. Anything you see on the blade is oil / dust / dirt from sticking to the oil.
*There is a very small round spot on the clip (like the coating is missing), but that's how the knife came.
5. Brous Blades Mini Division: black acidwashed D2, Carbon Fiber --> €239 F&F (Trade value €250)
I got this from a private seller who send it to me without the lanyard ring. The scale does not align perfectly with the steel liner that sits on. Some wear on the clip and on the flipper tab (maybe it's just the finish that looks like that on the tab). This was sharpened by him to a nice edge but he did bite into the ricasso area.
6. Benchmade Bugout X Work Sharp Edition with custom aluminum scales --> €230 F&F (Trade value €230)
This edition comes with 20CV Steel version with bright yellow scales. The aluminum scales were purchased from Aimfront at ETSY (cost with shipping and taxes came at 84 euros). Very well done scales. The knife has not been carried or used to cut anything, other than the scale swap and some flicking. Full box and original scales are included. *There are some stonewash-like or water-like markings on the black hardware (screws and tips) but that's how the knife came. I've seen this on all the Benchmades i've had before, as well.
7. Willumsen Chibs CH21TGR Grey & Black G10 / Sandvik 14c28n --> €95 F&F (Trade value €95)
Brand new. Handled only once but not really what i expected. Comes with full box (the box came with some marks and i did tear it a bit when opening).
https://imgur.com/a/hgLXAug
8. Boker Plus Rold, D2 Steel/Black G10 --> €120 F&F (Trade value €130)
Even though i have not used this to cut, it has a black mark on the blade from sheathing. I tried to clean it but it won't come off. Please study the pictures well as the fit and finish is not great on these knives. Tool marks, low grit machining on the G10, the stonewash looks weird, it also seems that the pins have that strange stonewash finish, some markings on the sheath up high...it's not a show knife but it will make a great user.
https://imgur.com/a/ISNyMTN
9. ESEE Molle back attachment --> €50 F&F
Used for a while but nothing wrong with it.
Comes with all original screws
https://imgur.com/a/itdYUe3
10. Beretta tactical messenger bag --> €70 F&F
24L / YKK zippers / 600D Nylon construction
Pictures are generic, bag was removed from the nylon to check it but put it back in without any use (i will be adding a pic of it for proof shortly)
https://imgur.com/a/zK81l1c
11. Helikon-Tex Trip-Roll organizer --> €22 F&F
Orange color / sealed
https://imgur.com/a/oQ50efF
12. Helikon-Tex Urban Admin pouch --> €30 F&F
Used for a short time but really is like new
https://imgur.com/a/OZuD8nT
13. Fenix E20 Torch --> €30 F&F
Sealed
https://imgur.com/a/0OeRQ5g
For trades, i would consider: TOPS Longhorn Bowie / ZT0392 / ZT0462BLK / ZT0808 / ZT0808BLK ...maybe some other limited run of ZTs, fixed blades from Swamprat
1. Zero Tolerance 0762 (ZT0762) --> €310 F&F (Trade value €350)
Has been handled a couple of times but has not been used in any way. Full box
2. Zero Tolerance 0460 ti (ZT0460ti)--> €210 F&F (Trade value €240)
Has been handled a couple of times but has not been used in any way. Full box
3. Zero Tolerance 0450 Magnacut & Blue CF (ZT0460BLU)--> €220 F&F (Trade value €240)
First owner. Carried This for 2 or 3 days max at work. It has been used to cut paracord (and also burned paracord which is hard). I don't see any issues with the edge. The only fault i can spot are maybe 3 very small and light scratches on the clip but you really have to see it from up close to spot them. Detent is just a bit strong but flies open, lockup is early.
https://imgur.com/a/6KUQYtC
4. Spyderco Delica thin blue line C11FBKBL --> €87 F&F (Trade value €90)
I am the first owner, carried it at work for 4 hours just to get the feeling of it, and I have cut paper just to see how sharp it is. Anything you see on the blade is oil / dust / dirt from sticking to the oil.
*There is a very small round spot on the clip (like the coating is missing), but that's how the knife came.
5. Brous Blades Mini Division: black acidwashed D2, Carbon Fiber --> €239 F&F (Trade value €250)
I got this from a private seller who send it to me without the lanyard ring. The scale does not align perfectly with the steel liner that sits on. Some wear on the clip and on the flipper tab (maybe it's just the finish that looks like that on the tab). This was sharpened by him to a nice edge but he did bite into the ricasso area.
6. Benchmade Bugout X Work Sharp Edition with custom aluminum scales --> €230 F&F (Trade value €230)
This edition comes with 20CV Steel version with bright yellow scales. The aluminum scales were purchased from Aimfront at ETSY (cost with shipping and taxes came at 84 euros). Very well done scales. The knife has not been carried or used to cut anything, other than the scale swap and some flicking. Full box and original scales are included. *There are some stonewash-like or water-like markings on the black hardware (screws and tips) but that's how the knife came. I've seen this on all the Benchmades i've had before, as well.
7. Willumsen Chibs CH21TGR Grey & Black G10 / Sandvik 14c28n --> €95 F&F (Trade value €95)
Brand new. Handled only once but not really what i expected. Comes with full box (the box came with some marks and i did tear it a bit when opening).
https://imgur.com/a/hgLXAug
8. Boker Plus Rold, D2 Steel/Black G10 --> €120 F&F (Trade value €130)
Even though i have not used this to cut, it has a black mark on the blade from sheathing. I tried to clean it but it won't come off. Please study the pictures well as the fit and finish is not great on these knives. Tool marks, low grit machining on the G10, the stonewash looks weird, it also seems that the pins have that strange stonewash finish, some markings on the sheath up high...it's not a show knife but it will make a great user.
https://imgur.com/a/ISNyMTN
9. ESEE Molle back attachment --> €50 F&F
Used for a while but nothing wrong with it.
Comes with all original screws
https://imgur.com/a/itdYUe3
10. Beretta tactical messenger bag --> €70 F&F
24L / YKK zippers / 600D Nylon construction
Pictures are generic, bag was removed from the nylon to check it but put it back in without any use (i will be adding a pic of it for proof shortly)
https://imgur.com/a/zK81l1c
11. Helikon-Tex Trip-Roll organizer --> €22 F&F
Orange color / sealed
https://imgur.com/a/oQ50efF
12. Helikon-Tex Urban Admin pouch --> €30 F&F
Used for a short time but really is like new
https://imgur.com/a/OZuD8nT
13. Fenix E20 Torch --> €30 F&F
Sealed
https://imgur.com/a/0OeRQ5g
Last edited: