- Joined
- Apr 13, 2017
- Messages
- 1,805
Hello gentle people, Here’s a new EDC/skinner up for your consideration.
Steel: 3/32”x 1 ¼” 52100 professional HT 60/61
Finely finished to P1500 grit for high satin finish on bevels and flats.
Edge before sharpening below .010” or so and the blades glide through phone book paper, leather, rope etc.
Dimensions: 7 7/8” OAL, Tip to Scales 3 3/8”.
Deep red Padauk scales sanded to 1200 grit and four 3/32” stainless pins. Finished with multiple coats of Danish oil and carnauba wax.
Right handed sheath, molded for a snug fit. I'd be happy to make a left handed one on request.
Asking only <SOLD> to your door via paypal, check or MO. Questions and comments are welcome and as always your satisfaction is my only priority. You can also see this and more of my work at facebook.com/jwccustom57
Thanks for your time
John Cahoon
Steel: 3/32”x 1 ¼” 52100 professional HT 60/61
Finely finished to P1500 grit for high satin finish on bevels and flats.
Edge before sharpening below .010” or so and the blades glide through phone book paper, leather, rope etc.
Dimensions: 7 7/8” OAL, Tip to Scales 3 3/8”.
Deep red Padauk scales sanded to 1200 grit and four 3/32” stainless pins. Finished with multiple coats of Danish oil and carnauba wax.
Right handed sheath, molded for a snug fit. I'd be happy to make a left handed one on request.
Asking only <SOLD> to your door via paypal, check or MO. Questions and comments are welcome and as always your satisfaction is my only priority. You can also see this and more of my work at facebook.com/jwccustom57
Thanks for your time
John Cahoon
Last edited: