- Joined
- Sep 9, 2015
- Messages
- 3,553
Anyone interested in a 0.25 thick fixed blade in Ztuff?
I have a chunk left over from a tomahawk project. Its rougly 6.5 inches long by 3 inches wide. I will measure, once im home from work.
Some more info on the steel. Its supposed to be as tough as S7 with the edge holding of A2. So far in my testing it had excellent edge stability and toughness, and quite good edge holding. I had used it previously in the thread Ztuff chopper( much thicker stock). It lives up to the name Ztuff.
The idea is to make a cool EDC or smaller hard use knife. Hardness will be 59HRC.
I have a chunk left over from a tomahawk project. Its rougly 6.5 inches long by 3 inches wide. I will measure, once im home from work.
Some more info on the steel. Its supposed to be as tough as S7 with the edge holding of A2. So far in my testing it had excellent edge stability and toughness, and quite good edge holding. I had used it previously in the thread Ztuff chopper( much thicker stock). It lives up to the name Ztuff.
The idea is to make a cool EDC or smaller hard use knife. Hardness will be 59HRC.