Fiddleback Flea Market

[Choppaman]

SOLD!

 

[Kenneth F Huls]

hi all.
i have several for sale. i would consider a trade for the "right" handyman and/or bushfinger.

prices include insured USPS priority shipping and paypal fees (goods & services only).

i will talk about condition as a group (unless otherwise noted). all knives appeared unused when i received them. however, i can only be sure about 3. i was the original owner of the bolstered kephart and bushie (FBF sale) and i purchased the gaucho from DLT. all knives have received minimal use, but that means they are all now "used". all knives show slight staining/patina on blade now.

please let me know if questions.

thanks.
-todd

kephart ($310):
Steel: 1/8" 80CRV2
BL: 4-"
HL: 4 3/4-"
Height: 1 1/8"
Handle: Katalox - Goldenrod Bolsters, Natural Liners, Orange Pinstripes

gaucho ($295):
Steel: 3/32" A2 (i think)
BL: 4 1/8"
HL: 4 1/2"
Height: 1 1/8"
Handle: cross cut micarta, natural and blue liners

KE bushie ($275):
Steel: 1/8" O1
BL: 3 5/8+"
HL: 4 5/8"
Height: 1 1/16"
Handle: Cross Cut Natural Canvas, Natural Liners, Blue Pinstripes

bushfinger ($220):
Steel: 1/8" A2
BL: 4+"
HL: 4 3/4"
Height: 1.25"
Handle: brown burlap micarta scales, black and orange G-10 liners

kephart ($235):
Steel: 1/8" A2
BL: 3 7/8"
HL: 4 3/4-"
Height: 1 1/16"
Handle: i can't remember if this one is ironwood or rosewood, black liners and pins, white pinstripe
Note: the handle is noticeably thicker on this one compared to the other kephart

guardless ladyfinger ($260):
Steel: 3/32 A2
BL: 4+"
HL: 4 1/2"
Height: 1"
Handle: tuxedo config (black micarta, nat pins and liners, white pinstripe)

handyman ($185):
Steel: 1/8" A2 (i think)
BL: 3 1/4"
HL: 4 3/8"
Height: 1"
Handle: i honestly cannot recall what the handle material is. it may be brown micarta, nat liners and pins, orange pinstripe

PM sent RE trade for “the ‘right’ Handyman. Thanks,
Ken

 

[mgray34]

I don't buy or sell very much so all prices are OBRO. First "I'll take it" gets it. All prices include Paypal and Shipping. Additional pictures are available upon request via email or text.
IMG_2416 by matt gray, on Flickr

1- Patch, A2, 5/32, Tapered Tang, like new and unused, $275
2- KPH, A2, 1/8, lie new and unused, $325
3- Recluse, A2, 5/32, Tapered Tang, like new and unused, $260
4- Recluse, 01, 3/16, Tapered Tang, like new and unused, $260
5- Bushcrafter, 01, 5/32, Tuxedo, used, $210
6- Bushfinger, 01, 5/32, used, $SOLD
7- Bushfinger, 01, 1/8, like new and unused, $245
8- Hunter, 01, 5/32, used, $315

 

[K.B. Knifeworks]

KE Bushie up for (Sold) in the trade section.https://www.bladeforums.com/threads...hill-scagel-hunter-or-open-to-others.1741714/

Also willing to sell for ($Sold PPLshipped in lower 48). PM me.

 

[warrenwrench]

I don't buy or sell very much so all prices are OBRO. First "I'll take it" gets it. All prices include Paypal and Shipping. Additional pictures are available upon request via email or text.
IMG_2416 by matt gray, on Flickr

1- Patch, A2, 5/32, Tapered Tang, like new and unused, $275
2- KPH, A2, 1/8, lie new and unused, $325
3- Recluse, A2, 5/32, Tapered Tang, like new and unused, $260
4- Recluse, 01, 3/16, Tapered Tang, like new and unused, $260
5- Bushcrafter, 01, 5/32, Tuxedo, used, $210
6- Bushfinger, 01, 5/32, used, $225
7- Bushfinger, 01, 1/8, like new and unused, $245
8- Hunter, 01, 5/32, used, $315

PM sent

 

[TPVT]

hi all.
i have several for sale. i would consider a trade for the "right" handyman and/or bushfinger.

prices include insured USPS priority shipping and paypal fees (goods & services only).

i will talk about condition as a group (unless otherwise noted). all knives appeared unused when i received them. however, i can only be sure about 3. i was the original owner of the bolstered kephart and bushie (FBF sale) and i purchased the gaucho from DLT. all knives have received minimal use, but that means they are all now "used". all knives show slight staining/patina on blade now.

please let me know if questions.

thanks.
-todd

kephart ($310):
Steel: 1/8" 80CRV2
BL: 4-"
HL: 4 3/4-"
Height: 1 1/8"
Handle: Katalox - Goldenrod Bolsters, Natural Liners, Orange Pinstripes

gaucho ($295):
Steel: 3/32" A2 (i think)
BL: 4 1/8"
HL: 4 1/2"
Height: 1 1/8"
Handle: cross cut micarta, natural and blue liners

KE bushie ($275):
Steel: 1/8" O1
BL: 3 5/8+"
HL: 4 5/8"
Height: 1 1/16"
Handle: Cross Cut Natural Canvas, Natural Liners, Blue Pinstripes

bushfinger ($220):
Steel: 1/8" A2
BL: 4+"
HL: 4 3/4"
Height: 1.25"
Handle: brown burlap micarta scales, black and orange G-10 liners

kephart ($235):
Steel: 1/8" A2
BL: 3 7/8"
HL: 4 3/4-"
Height: 1 1/16"
Handle: i can't remember if this one is ironwood or rosewood, black liners and pins, white pinstripe
Note: the handle is noticeably thicker on this one compared to the other kephart

guardless ladyfinger ($260):
Steel: 3/32 A2
BL: 4+"
HL: 4 1/2"
Height: 1"
Handle: tuxedo config (black micarta, nat pins and liners, white pinstripe)

handyman ($185):
Steel: 1/8" A2 (i think)
BL: 3 1/4"
HL: 4 3/8"
Height: 1"
Handle: i honestly cannot recall what the handle material is. it may be brown micarta, nat liners and pins, orange pinstripe

the handyman has sold. the rest are still available. if you see a knife you're interested in, please let me know.

thanks.
-todd

 

[rileybassman1]

Cohutta Forester in Cross Cut micarta with 1/8" A2, comes with RLO sheath:
$old

Listed here as well:
https://www.bladeforums.com/threads/cohutta-forester.1741680/

 

[Warrior108]

Red-shaded items have been sold. *sniff*

The rest are still available in Post #15183 and open to reasonable offers.

Next Thurs I leave to visit my sick mom via 1,700 mi road trip (TX to PA) So, motivated to move these ..

 

[Choppaman]

----

 

[JRTufts]

SOLD!

Hiking Buddy: $OLD PP G&S Shipped Cont. US
1/8” A2 TT Spalted Convex Grind - Desert Ironwood with Natural Pins/Liners and White Pinstripes. It has been EDC’d and sharpened on a knife steel/stropped. There is a slight patina and a couple of scratches on the blade.

 

[jcorbin]

FOR SALE
Bushcrafter-Bocote-black liners-orange pinstripe-5/32" 01 TT- Asking $165.00 PP F/F (or $170 G/S). Includes shipping to ConUS w/tracking. NO offers or trades being accepted at this time. Does not come with a sheath. New condition. never used or carried. Thanks for looking!!

I thought I had this listed already. Cannot find it. This post overrides any previous posts.

If the Bushcrafter is still available, I'll take it!

 

[Choppaman]

If the Bushcrafter is still available, I'll take it!

It is. and it's yours. Thank you. DM coming

 

[Twisted Forest]

I wi

Selling a beautiful Monarch with blue curly maple and natural micarta bolsters. Steel is 5/32" TT in A2. Natural liners and lime pinstripes. It is new condition. Stunning materials. Asking $155.00 PP F/F payment ($160 G/S) NO offers or trades being accepted at this time. Shipping ConUS w/tracking. DM with any questions you may have.
Thanks for looking.

I will take the Monarch please. Thanks!

 

[Choppaman]

I wi

I will take the Monarch please. Thanks!

It is yours. Thanks!! DM coming

 

[ngomong]

1/8” A2 TT Spalted Convex Grind - Desert Ironwood

Is this still available? If so, I'll take it.

 

[JRTufts]

ngomong It is available and yours. I’ll send you a message in a moment, thanks!

 

[oregondux85]

Anyone have a sgian dubh they want to pass along?

 

[Choppaman]

RELISTED

 

[Choppaman]

SOLD

 

[Mr. Tettnanger]

I am looking for a Production Kephart to try out. If you have one gathering dust, please let me know. I would prefer one with the black scales.

Thank you!