StuntDouble
Gold Member
- Joined
- Apr 26, 2004
- Messages
- 2,381
Dang. I hope he didn't go missing. I always look forward to updates on this thread, and was even hoping I might be able to get in on the pass-around.
The Traveling Spyderco Delica. . .
- Thread starter MostMenAreRuthless
- Start date
I'm here guys. Apologies for going dark on this. Too much unplanned travelling the last couple of weeks. Cam has been in my pocket every day when not travelling. I could take him in a checked bag, but I almost lost two knives that way last month and didn't want to try it again.
Most days Cam has to sit and watch me do this
And occasionally get to do this
The couple of times I was in town and could have taken pics I was surrounded by people. I'm trying to figure out how to hold a knife in one hand while taking pics and now have people freak out about the guy with a knife. I'm thinking before 6:00am my chances are better. Either that, or I limit pics to the house and the woods.
Most days Cam has to sit and watch me do this
And occasionally get to do this
The couple of times I was in town and could have taken pics I was surrounded by people. I'm trying to figure out how to hold a knife in one hand while taking pics and now have people freak out about the guy with a knife. I'm thinking before 6:00am my chances are better. Either that, or I limit pics to the house and the woods.
BD_01
Basic Member
- Joined
- Jun 9, 2016
- Messages
- 3,798
Haha I hear ya! Ultimately I think most people are oblivious. Most that aren’t will notice a camera in the other hand, shrug, and move along. But yeah, comfort depends on the setting. Good thing MMAR didn’t start this with a smatchet.
BD_01
Basic Member
- Joined
- Jun 9, 2016
- Messages
- 3,798
Yeah, sorry again guys. Just terrible timing. Unexpected work travel, unexpectedly got a foster kid (child protective services calls and showed up an hour later), other stuff going on. Not going how I expected. Got some pics over the weekend I'll post. Hoping for an outing this weekend. Sometimes live just doesn't follow our plans.
- Joined
- Jan 23, 2014
- Messages
- 740
“Hey! Another hole!” ...that was funny! 
Cam is moving on to his next host. Sorry not doing more regular updates. What's the saying about hearing God laugh when you share your plans (Woody Allen, btw). Spending more time doing knife stuff didn't work out as I had planned.
Cam was busy with me the last few days. Helping on some deck work. All the hardware on this deck was so rusted screws had to be pulled. Square drive holes just disintegrated when I tried to unscrew them.
Cam watched this rusty ax get an edge to chop out some stumps.
Cut some drip hose.
Relatives saying goodbye.
Back into his pink protective foam.
Portland post card to go along...
Apologies again for not being as engaged here as I planned to. Having Cam was interesting and was my EDC 90% of the time. Not news that that the Delica is a very good EDC. A few things I got reminded of:
Cam was busy with me the last few days. Helping on some deck work. All the hardware on this deck was so rusted screws had to be pulled. Square drive holes just disintegrated when I tried to unscrew them.
Cam watched this rusty ax get an edge to chop out some stumps.
Cut some drip hose.
Relatives saying goodbye.
Back into his pink protective foam.
Portland post card to go along...
Apologies again for not being as engaged here as I planned to. Having Cam was interesting and was my EDC 90% of the time. Not news that that the Delica is a very good EDC. A few things I got reminded of:
- I don't like serrated blades much
- Beater knives have advantages and I'll be looking to buy some
- Even with some minor blade play, this knife is safe and fully functional - not even close to worn out
- We generally need a lot less knife (cost-wise) than we carry
- VG-10 is pretty decent steel
Last edited:
Hey knife addicts, got a couple packages today!
Here is Cam, still in the box with his brothers strategically covering addresses.
This is the first small Spyderco I will carry. Cam will help me decide what my next Spydie will be. I’m looking at either a Delica, Para 3 or lil Native.
Couldn’t resist doing this pic.
Accumulated postcards.
Cam got to work on the other package right away. Still sharp enough!
The other package was a little cubby thing for the wife’s Miata.
Using Cam to cut away some wire wrap to get that cubby installed.
Pretty cool little knife. Good size for everyday tasks as not even noticeable in the pocket.
I’m about 20 minutes from Spyderco HQ so Cam will be taking a trip. Going to get some hands on experience with the small knives mentioned above.
Maybe get it sharpened if they’re not too busy.
Til next time.
Here is Cam, still in the box with his brothers strategically covering addresses.
This is the first small Spyderco I will carry. Cam will help me decide what my next Spydie will be. I’m looking at either a Delica, Para 3 or lil Native.
Couldn’t resist doing this pic.
Accumulated postcards.
Cam got to work on the other package right away. Still sharp enough!
The other package was a little cubby thing for the wife’s Miata.
Using Cam to cut away some wire wrap to get that cubby installed.
Pretty cool little knife. Good size for everyday tasks as not even noticeable in the pocket.
I’m about 20 minutes from Spyderco HQ so Cam will be taking a trip. Going to get some hands on experience with the small knives mentioned above.
Maybe get it sharpened if they’re not too busy.
Til next time.
Last edited:
BD_01
Basic Member
- Joined
- Jun 9, 2016
- Messages
- 3,798
Wow, that would be amazing. Doubtless he’s aware of this thread...No pic of Sal holding Cam?
No Sal or Eric sightings but the employees were excited to hear about the traveling Delica.
I had Cam on the table to measure up some other small knives and both employees noticed it right away. I thought it was a zome but looking now, Cam is pretty unique.
John snatched him up right away to give him a "spa treatment". He spent a solid 20 minutes on the sharpmaker getting him to a factory bevel, lubed him up, then tightened some blade play and blue loctited every bolt. This little Delica has never had it so good!
Here's John being a badass on a Sharpmaker.
Cam fits right in.
One of these is my next office carry knife. I didn't even know the lil Rhino existed.
This history of the Native display was pretty cool. It started as a Wal-Mart knife!
A Salt showing off in the saltwater tank.
Cam all gussied up.
The employees went out of their way to find the very last 2018 factory outlet sticker. They said they give away tons of free stickers at blade shows etc but this outlet sticker can only be picked up in Golden, Colorado, Earth.
It's going in the box with Cam to the next host. John suggested I plop it on a Colorado postcard.
What do you guys think? Leave it as is or stick it to a postcard?
We had a great time at the HQ. Make sure to go if you're ever in the area.
I had Cam on the table to measure up some other small knives and both employees noticed it right away. I thought it was a zome but looking now, Cam is pretty unique.
John snatched him up right away to give him a "spa treatment". He spent a solid 20 minutes on the sharpmaker getting him to a factory bevel, lubed him up, then tightened some blade play and blue loctited every bolt. This little Delica has never had it so good!
Here's John being a badass on a Sharpmaker.
Cam fits right in.
One of these is my next office carry knife. I didn't even know the lil Rhino existed.
This history of the Native display was pretty cool. It started as a Wal-Mart knife!
A Salt showing off in the saltwater tank.
Cam all gussied up.
The employees went out of their way to find the very last 2018 factory outlet sticker. They said they give away tons of free stickers at blade shows etc but this outlet sticker can only be picked up in Golden, Colorado, Earth.
It's going in the box with Cam to the next host. John suggested I plop it on a Colorado postcard.
What do you guys think? Leave it as is or stick it to a postcard?
We had a great time at the HQ. Make sure to go if you're ever in the area.
BD_01
Basic Member
- Joined
- Jun 9, 2016
- Messages
- 3,798
I love the sign in the background. “Knives are extremely sharp...”
I’d say that’s been true with every Spyderco I’ve had the pleasure of unboxing.
Also, I didn’t know they had an envraving service. I may have to give them a call sometime.
Great day for Cam and the thread!
PS. I hope you took that Rhino home with you.
I’d say that’s been true with every Spyderco I’ve had the pleasure of unboxing.
Also, I didn’t know they had an envraving service. I may have to give them a call sometime.
Great day for Cam and the thread!
PS. I hope you took that Rhino home with you.